length

I know it has to do with rpm, cam duration, lift, timing & a bunch of other numbers I don't really understand too well. If I'm building for a 7,500 max rpm target with a hemi-predator, does anyone know what length I need for a pipe which will provide some scavenging? Thinking it would be made...

I'm going to replace my brake lever and cable assembly. I need a cable housing about 50" long. All I'm finding are longer, with each end having metal cap. Can I cut off the end down at the wheel to the length I need ? It looks like it goes into a socket and would be immobilized and covered.

Does anyone know the correct length for the 4 spacers on a rear wheel? The 4" steel wheel to be exact.

$7.00 each plus shipping. Nice, soft & flexeble. I have plenty.

Title says all. i need the money so i can buy a forged ARC rod for the 420cc Predator motor.

The original HS40 engines on these bikes had the longer 3" PTO end on the crankshaft to accommodate the TC driver. Has anyone ever used a "regular" HS40 with the 2.25" PTO end and converted/modified it to work with the TC driver? Do you fabricate and add some sort of spacer on the end of the...

I'm having issues getting the chain the perfect length. Its either too short or too long and dragging against the engine plate. Is it possible to remove a single plate? The first pic shows where it is too long with the masterlink, I'm holding it there for reference. Second pic shows where it...

Does anyone know what is the correct length is for the axle on a MTS 30? Or could someone take a pic of the underside of their MTS 30, The guy that was suppoosed to restore my MTS 30 lost the entire axle set up including both rear tires and rims, Im also in search of a donor one so I can finish...

Put a what I believe is a gx160 head on my hemi predator. Running a black mamba sr cam. I tried to use my stock length hemi Pushrod(5.54in) , but I could barely thread the lockout on yhr rocker stud. Replaced the pushrods with 5.34in long, and I can get my lockouts on, but now it seems like I'm...

An expert needs to weigh in on the correct size.

Hello, Just verifying Is the H60 connecting rod slightly longer or shorter than the H50 rod? I did not label when I disassembled a few of each. Thanks, Joe

All, I have an early five inch Taco style aluminum wheel. I need the spacer length. This is the space between the sprocket and the rear wheel. Thanks.

Can anyone tell me how long the kickstand is on their Stellar? Looking to just get some basic aftermarket bs kickstands for mine. Very sick of propping them up on stuff and scratching the shit out of the new paint jobs I gave em. Thanks

What is the difference in the 69 and 70 Rupp Roadster tav covers. Is one longer than the other? Anyone have the length on both?

for 5/8" and 1" shafts? thank you :scooter:

I have searched till my brain hurts and i cant find a step by step video on how to measure for rod length. Does anyone have a link my motor is the hemi predator. Thanks in advance.

Can anyone tell me the length of these 2 axles? I need to buy them. Thanks.

I hope this is the correct forum. I have a header on my chopper. It is too loud to drive around at shows. I need to tone it down a bit. Got any ideas? It is 1 1/2 " in dia. and about 5 to 5 1/2" in length to work with. If I could find a muffler I would weld it inside. Or a removable baffle. John

The Fur Ball had motorcycle shocks on it. Are 12" the correct length?

If anyone has the length of the Tecumseh OHV pushrods (5.5hp to be exact) on hand, I'd appreciate it.