lights

  1. L.skynrd

    Will lighting coils work on this engine?

    Hello everyone. I recently blew the original engine on my Baja warrior. I removed the flywheel, lighting coils and ignition coils. I want to know if the flywheel from the old engine will work on the new one. The current engine I am using is a power fist 212cc, and it appears to be similar to a...
  2. L.skynrd

    Will lighting coil and work on this engine?

    Hello everyone. I recently blew the original engine on my Baja warrior. I removed the flywheel, lighting coils and ignition coils. I want to know if the flywheel from the old engine will work on the new one. The current engine I am using is a power fist 212cc, and it appears to be similar to a...
  3. gumpit

    1974 Honda XL70 lights

    All my lights work. But stop lighting and blinking if I rev it up. When the rpms come back down they light and blink again. Thoughts
  4. P

    Led lights ?

    I think I already know the answer to this, but I just want it confirmed. Will led lights work with AC ? I know Tec lighting coils put out AC instead of DC.
  5. K

    ebay bc1200 with lights survivor

    Original Vintage 1968 Bonanza BC1200 Survivor Mini Bike With Lights Rupp | eBay
  6. Midyrman

    Lenses: Bonanza MX1310 Head light and Tail Lamp

    Looking for lenses for both lights. Does anyone sell replacement lenses? Thank you. Tom
  7. K

    Hawg TY mini bike

    just bought this bike. need to know what model and engine cc before i can order parts or manual. will be adding lights and signals to register it for street use. might need to also change the tires! thanks! kathy
  8. N

    Can a Go-Kart become street legal?

    Hey!:laugh: I'm new to this forum and have recently built a go kart over this past summer. Its an old Manco frame with generic HF wheels and a Harbor Freight Predator 6.5 hp 212cc engine. I currently live in New Hampshire and was wondering if it was possible to make this cart street legal, by...
  9. D

    baja warrior forks and disk breaks

    I saw some post saying the forks are not strong enough to handle a front break, and the would need to be upgraded. Where could some one find An upgraded version of the forks for a baja warrior? One more thing I'm looking for a way to run lights (head light high, low beam; running lights, led)...
  10. D

    baja warrior forks/ disk breaks

    I saw some post saying the forks are not strong enough to handle a front break, and the would need to be upgraded. Where could some one find An upgraded version of the forks for a baja warrior? One more thing I'm looking for a way to run lights (head light high, low beam; running lights, led)...
  11. Little Indian

    need some help on lights

    :confused:i have a little indian with a 6.5hp and a stright pipe on it and i was wondering if any one knows what kind of lights to put on i had some cheap bicycle lights on it but they would go out when i started riding and i want to get some ones with batteries no wires thanks
  12. D

    Return to my mini bike youth

    I have been doing some research on mini bikes and found your site. I grew up with mini bikes my first was a LIL Indian. I had a blast with that bike. Living and working in the country lead me to saving up and buying a new DMP Trail Champ from the factory at Dehi. Front back disc brakes, torque...
  13. U

    [B]Accessories and Lights for my Doodlebug[/B]

    Hi there fellow bikers. A while ago I bought a charging system for my Honda clone engine to run lights. The problem was the coils only had one wire, so I bought a Briggs regulator, with two wires, red and yellow. With it, I only got about 7 volts at idle, and I had AC voltage going through the...
  14. J

    Cree Lights Mount Fix

    I've written about Cree LED bike lights in other threads and I have fairly glowered over their brightness and decent battery life for small r/c nicads, and they totally solve the night lighting issue for minibikes with clones without lighting coils. The stock mounting "hardware", if you can call...
  15. W

    How to power lights on a MB?

    OK, I need about 10-12 amps to run lighting on a fat tire hunting two wheeler. Honda QX200 motor has an aftermarket aluminum flywheel and can turn 6000 RPMs. So any suggestions on a magneto alternator and regulator combination?
  16. K

    predator lights

    can u hook up lights into a harbor frieght predator clone. please help
  17. C

    Lights on Predator Swap?

    Okay yeah so I have a predator 212 swapped FOX from the 70's and I want a headlamp and tail lamp. Question is, do I have a lighted coil? If not can I get one easily and is installation excessive? - Cole
  18. markus

    PMCO tail lights

    I got a few taillights in a deal (3) they are the metal housing genuine PMCO taillights with PMCO lenses and NOS they are 2 generations back of this light. the stampings are deep and defined. They do not have the the tag light though so for a bike such as a rupp might not be the best choice but...
  19. 5horsebriggs

    running lights off a predator motor

    do predators have lighting coils or do i need to buy one?
  20. J

    6 volt lights

    Anyone know where I can find some minature 6 volt lamp and lens assy. for example turn signal light on a headlight bucket :shrug:
Top