manifold

rear axle mount

pedal hub

intake manifold

intake manifold

Does anybody have about 12" of header/manifold tape. I can't see buying a giant roll for 12 inches. I could also trade you for some floresent green:laugh: Burnt my leg on the new bike all ready:doah: THANK YOU

Hello, I'm looking for an intake manifold that will fit a tillotson hl carb. It will be going on a clone. Let me know what you got.

Like the subject, I'd like to know if the Intake manifold insulator is needed and what it actually does. This is on a gx200. I swapped in a Black Mamba Jr cam, 26lb springs, removed the gov, added alum flywheel, header, .140 emul tube, .036 jet, and intake. Now the dang thing won't start and...

Hey guys, I'm looking to build my own intake manifold for my tillotson carb. i wanted to know when making a manifold the bore on the carb and on the head should it be the exact same size. Thanks

Looking for a 5hp briggs intake manifold.. homemade? fancy? tec intake? Trying to mod an intake to fit a mik. If its steel that's a plus.. My attempts at making one are falling short..

Hi selling a used rev kit and Tillotson EC 304 to Clone manifold Rev Kit $45.00 USD 28.5mm Int SS Valve and Seat (both new) 24mm SS Ext Valve (Lightly used) Retainer & Keeper Set Chromo Push Rods Tillotson Manifold with gasket kit and mounting hardware is Brand new never used $25.00 USD

Brand new EC Tillotson 304WX Carb to Clone Manifold with hardware and gaskets still in bag for sale. Price $25.00+ Ship

:detective: Need help in finding or compensating for the 20 degree engine mount on a 72 Speedway Shrike I'm restoring with my oldest son. I've been getting pieces from everywhere to make this happen for us. Huge Shout out to "Fat Boy" who has hooked me up with an intact frame:thumbsup: That...

i am installing a NOS HS50 engine that has a straight intake with a bowl type carb the stock H40 had a straight intake with a diaphragm carb should I expect problems and why did they switch manifolds other than the carb sitting straight up any body have any info ? mmurffy01@hotmail.com

Hey all..been reading most of the threads concerning this topic but I need to know the following. The intake port on the 5 measures 3/4" in diameter. I'm trying to fab a manifold to accommodate a 23mm Mikuni. The port on the carb is a little over 7/8". Can I use 3/4ID pipe for the whole thing...

hi im nearly ready to put my engine into my frame but i need a manifold to take my 3 hole briggs to a 20/22mm mikuni or similar? anything off the shelf for that? if so could anyone post a link cheers

Hey guys. I am in the process of restoring an VT-7 Super bronc and have decided to use a HM80 power plant. My SB comes with the original Jackshaft and band brake setup. As you can see in the picture, the carb, intake manifold are in the way. I was wondering how I could relocate the carb to...

This engine has a very restrictive intake and would like to replace it with something better. Please PM if you have something.

i'm in need of a carb for a straight mounted tech engine and intake man. also

I need a Mikuni manifold for my new carb, hope someone has one laying around or something. Thanks SJ

I'm looking for a H70 carb and the manifold that adapts it to the block. I have this old H70 from a snowblower that needs a carb. Thanks. Sent from my iPod using Tapatalk