mercury

y GGYN12-12RC35 DECENT CONDITION, I HAVEN'T TRIED IT MYSELF - asking 50.00 dollars dunegrassdes@gmail.com

y GGYN12-12RC35 DECENT CONDITION, I HAVEN'T TRIED IT MYSELF - asking 50.00 dollars dunegrassdes@gmail.com

y GGYN12-12RC35 DECENT CONDITION, I HAVEN'T TRIED IT MYSELF - asking 50.00 dollars dunegrassdes@gmail.com

y GGYN12-12RC35 DECENT CONDITION, I HAVEN'T TRIED IT MYSELF - asking 50.00 dollars dunegrassdes@gmail.com

y GGYN12-12RC35 DECENT CONDITION, I HAVEN'T TRIED IT MYSELF - asking 50.00 dollars dunegrassdes@gmail.com

Would like to thank Rpol89 for hooking me up with a nice vintage Mercury clutch. Th is Lil Indian is so much fun to ride. Had to get out and ride at least one more time this year. Im no little fellow and the way these bike are made i can ride it all day and man these clutchs pull hard

Looking for a good 3/4 Mercury clutch to buy or trade for a 5/8 one that I already have thanks.

For sale is a Clinton A500 2 cycle from my Bird kart. Engine is free and has compression. I used a drill and socket to spin it since the recoil is missing. Tank appears solid but has old gas scum in the bottom. Not sure of the shaft size but it has a 10t Mercury clutch on it plus a chain guard...

I have a old unused mercury 1" monster size clutch and want to find out what hp. it can handle . Was thinking of a 24hp onan wheelie kart . Part #gyn16 . Thanks ,Dave

Old Allstate 80609 12T #35 clutch 5/8" bore. Looks like the style used on Taco minibikes. Slightly used, Rusty outsides as you can see. $60.00 Delivered.

Mercury GUN9-12RC35 Minibike / Kart Clutch 9/16 I.D. Appears to be N.O.S., but may have been slightly used. Has some rust on bell due to age. $100.00 Delivered ....Fits some West Bend Engines with 9/16" crankshafts used on some Taco models.

so i have a problem and i think its the clutch...i have a 2 hp briggs with a mercury clutch,when i turn it on with the rear wheel up so it can spin freely it does fine..BUT...when i try and start it with both tires on ground it whines and engine shuts off....any help? do i oil the clutch? or is...

I got a box of stuff in trade the the other week and just started going through some of the things. I found a real nice old Mercury clutch that still feels real smooth. Just wandered what's the scoop on them :shrug: Also got a Hilliard too. I use mostly Max Torque on the small bikes , since...

I have 3 Mecury drums and some misc parts to go with. 1)GMCN9-12RC35 needle bearing,12Tooth #35 chain NOS 2)GMCN10-12RC35 needle bearing,12Tooth #35 chain NOS 3)GMBS10-11RC35 bronze bushing,11Tooth #35 chain USED One of the needle bearing housings has the clutch guts with some...

I have 2 of these,1 in the package,other has been removed and has some minor scratches from shelf life. GMCN10-12RC35 NOS They fit a 5/8"shaft,have 12 tooth drums with needle bearings,and fit the #35 chain They are $30 EACH shipped via UPS

Got 3 of these,will list separately NOS,Mercury 5/8" clutch,model # GMBS10-11RC35 Bushing in clutch housing,11Tooth for 35 chain. $30 shipped via UPS

almost new, asking $30 shipped. located in so cal.

NEED OLDER PICKUP, PREFER MERCURY SOMETING TO RESTORE, OR READY TO GO,THANKS FOR ENY HELP :smile::smile:

I have a Mercury Clutch #5046-22 3/4 shaft size. Was on a old snowblower which I gutted a used the motor for a gokart. Just curious if the old asbestos beast is worth saving. It still works great but gets red hot which scared me don't want a part of a clutch flying threw the air. any info on these.

Mercury Chainsaw engine 2 cylinder 2 stroke