mess

What do you think ?

About 5 miles from me, notice the BIN price.... 1972 Heald VT T Super Bronc | eBay

Well, since my first attempt at painting my header failed miserably,I decided to wrap it with that fiberglass exhaust wrap. I ordered the black wrap and the stainless steel zip-ties from E-bay for $16.00 with free shipping. Then I chemically stripped the old 500 degree high temp paint off and...

I saw this minibike on craigslist early this morning and called the guy, Went over at 7:30am, looked at it and bought it. Of course I haggled him down some on his price, because the bike is a hot mess. The motor is really what I was after. I can salvage the wheels, clutch and gas tank too. I...

Looking to expand my vintage mini collection to include a mini lawn tractor like a bantam or wheel horse. Anyone mess around with these? Really curious :facepalm:

So during the Tare down when I was talking the forks off one of the springs got stuck in the framework and won't come out. And I don't want to mess anything up by doing something stupid. So I was wondering Has anyone ever had this problem? And how did they get it out?

http://www.bajamotorsports.com/documents/DB30_QuickStart_Guide.pdf

Is this 1967 Taco 44 brake drum, levers, plate, and everything pictured worth restoring? Is this how John Steen manufactured this unit? I see the repos have the bolts through the drum, not welded on. How does the brake cable attach. What is missing? Thank You all for your help!!!

So I stroll into to my local minibike shop, peruse the aisles and I'd found it! I wasn't sure exactly what had come across but the full suspension sealed the deal. I hurried to HF, grabbed a hemi headed predator, and several modifications and $$$ here I am. I'm new here and since all the search...

Ok so today I took the govener out of my bike and then put it back together and now it won't start. I don't know what I did. When I tried to start it it was making this putting noise that seemed to be coming from the filter or carb. So I took off the filter and tried to start it. The air gas...

I always have trouble changing the oil on my small motors using the drain hole (Warrior isn't easy to keep at an angle to drain and kart sucks since drain plug is sandwiched near jackshaft plate) so I had been using a siphon like this one Was easier but still a pain to use since you have to...

Trying to get my Lawn mower running and have no vacuum coming out of the fuel pump in the line going back to the tank. I have 5" of vacuum from line coming from the crank case and then going into the bottom port of the fuel pump. I'm assuming 5" is enough from the crankcase but don't know...

Savkel Rotary friend gave me one.I'm going to stick it on a mini.Looking for hp ratings and rpm range.

my 2.8 seems to have more power than i thought it would and it backfires at high rpms i had tightened up the linkage springs did i unknowingly deactivate the governor or something? :doah:

Allright guys, So i have a 5hp briggs, The modifications include removing the governer, Shaving the eyebrows, Swapping out the carb and tank for a older pulsa jet style, and general maintinance, including rebuilding the carb. The problem is that when its running it will only run on half choke, I...

i went to put a valve stem in the rear tire and busted the tire because it was so dry rotted so now i need 2 tires(cant just replace 1) the size is 11x7.10x6 i need to slicks please pm me if you have any

Decided I needed a motorized bicycle. Bought a kit on the net and picked up a nice old Murray 3-speed bike. The kit is advertized as 80cc but is acually only 66cc. But even then it's illegal because it's more than 49 or 50cc to be a gen-u-wine 'motorized bicycle" by the letter of the law...