modded

  1. S

    Predator Modded Now its Dead . . PLEASE HELP

    I am by no means a mechanic and i decided to modify my predator motor. At this point i have replaced the header (muffler right?) with one from OldMiniBikes, rejetted and etubed the carb, and put a new air filter on the carb.. The kit i bought came with a pulse fuel pump but i haven't done...
  2. vwfan79

    Reassembling modded 5hp

    First here are the specs- shaved eyebrows, mild port and polish, .300 lift cam, bored and flowed raptor carb, copper head gasket, dual springs, 3hp flywheel and coil, 3 stage header, billet rod. Now for the questions, I also have billet lifters but they are tapered at the bottom and won't allow...
  3. iatemeself

    modded engine first start omg

    just finished putting my engine together .65 milled ported 27mm intake 25mm ex Molly push rods billet lifters 1.2 rockers 26pound springs Suzuki locks + retainers lightweight caps black mamba cam billet rod billet flywheel 8 degree timing 22mm mikuni + ok long story short after I put the...
  4. M

    Need help finding a new clutch for my mild modded clone plz help

    I have a gx 200 clone with header intake jets 18pound springs 14cc head I have been running a comet but have been having issues with it I think it's just about shot so I'm trying to find a replacement a little more info on how I ride what gearing and tire size. I have 13x5-6 tires and 68t...
  5. C

    Modded Predator Engine

    I finally got to drive my sons go-kart last night after getting the motor all done. All I can say is WOW!!! This thing screams, it is way to fast for him to drive so now I have to figure out my own type of governor for it, that can be removed when adults drive it. Mods I have done is the...
  6. jeep4me

    Modded Honda Ruckus

    I've been thinking about getting a Honda Ruckus, so my wife can have something to cruise around on. Maybe I should get her this one:scared: 2009 modded Honda Ruckus w/ low miles
  7. godfather75

    highly modded doodle bug for sale

    I have a doodle bug with a 6.5 clone for sale. The motor has a big valve head(28.5mm,25mm), billet .020 rod, isk 290 cam, billet 1.2 rockers, 40lb springs, milled aluminum flywheel, 28mm flatslide mikuni. The bike has hydraulic disk brakes, custom seat, aluminum clutch cover, and has a hortsman...
  8. 8

    Doodlebug w/ modded clone NY

    This was a blast while i used it. Money is more important for my family at this time though. THE GOOD FAST. TORQUE doodlebug gx200 clone flat top piston arc billet rod engine mounting plate venturi and air filter 18lb springs no gov shaved head .030 2 stage straight header with...
  9. pro69nova

    Fully Modded GX390 FOR SALE

    Fully Modded gx390, stock stroke and bore, custom Arias piston, Arc Billet Rod (New), New Honda Crank Balanced intenally, ARC 3hp 390 flywheel @ 2.8lbs with adjustable timing, Billet adjustable Isky Camshaft, Welded Honda Head, 27cc chamber, Fully Ported, 6mm stem Titanium Valves, 1.550/1.350...
  10. 8

    Modded gx200 clone doodle bug

    WOW its been awhile since ive been on. SO much is going on right now. I HAVE to sell my minibike. Money is more needed then the bike. Im in Warwick NY. Im asking 375 but i will negotiate. Make an offer. THE GOOD FAST. TORQUE doodlebug gx200 clone flat top piston arc billet rod engine...
  11. E

    Modded 6.5 Clone

    6.5 Clone New clutch New gaskets 18 lb valve springs Affordable Go karts Fly wheel Affordable Go Karts connecting rod GX 390 Carb, UNI filter(not shown), and adapter 230$ Shipped. Located in Bel Air, MD
  12. cncd11

    Lets see your modded out Doodlebugs.

    As the title says it. Lets see them New style and old style and vintage Fox. No stockers here. Here is a pic of mine last year. I am working on a new frame for this year.
  13. J

    Cat 400x roller and Modded Clone Motor

    Like the title says. Cat 400x: Still have the original paint and seat to it. only a lilttle tare off to the side of the seat but over all still in good condition. It also has new tires, new tubes, and new bearings, and new chain guide. Will also include 2 original stars that go on the wheels...
  14. B

    modded gx200 clutch

    Any clutch preferences for a modified gx200 drag bike? Looking at a Bully 3 plate.
  15. J

    Anyone modded a stock muffler?

    Has anyone tried modding a stock clone muffler to increase flow? I could not find anything on the site about this. If you have any experience with this I would be interested in hearing what worked or did not work. Anyinformation on jetting and such that worked with any muffler mod would be...
  16. C

    modded clone wont start

    I have a mildly modified clone (see my sig the unknown kart motor) that wont start. I checked everything but I don't think the fuel pump is working correctly. What should I do?
  17. C

    Modded 6.5 clone won't idle

    I have a modded 6.5 clone (gov removed ARC flywheel, #90 jet, header) that refuses to idle- I must hold open the throttle to keep it alive and if i dont it will shut off. Please HELP
  18. Solo Cali

    22cc modded clone head.

    I have a used milled 0.045 22cc head for sale. Mildly ported with some minor chamber work for better flow. 18pd springs(not shown in picture)along with a Honda guide plate for use with ratio rockers. $60.00 shipped in US. Sold as is.
  19. oldschoolmbrida

    Modded 6.5 Clone Pics inside can get better ones

    ASKING 500 obo i spent alot more building it..u pay shiping PM or Email Manuelgoree@yahoo.com Call 408 307-9657 hours-3 cost- close to 1000 with labor fuel used 91 (from 76 gas station) oil used Motul etech 100 synthetic jetting and why the carb is so small (i dont remember...
  20. Caddy Kid

    The wife's modded doodle...

    Figured I'd post a couple pictures of my wife's modded doodle that I finished awhile back. Click on the thumbs to see the full sized picture: Its running a 6.5 Honda clone electric start from Carol Stream (which seems to be out of business now), a bike headlight I modded that now has...
Top