modified

The old test-mule is ugly... But she rips with this motor!

It's got some zip...

I got the 6.5 modified clone I special ordered from B&M Karting. I had to try it out so I tossed it in my test-mule Wards... 18 lb springs, CL-1 cam & Billet flywheel

I had to try it out so I tossed it in my test-mule Wards.I got the 6.5 modified clone I special ordered from B&M Karting...

King "o'' lawn frame w/ tank and added top bar. If you have any questions feel free to email me. Thank's! $40.00

One head is box stock, and the other is a big valve hed i done for my new test motor. Originally Posted by FCHP Date: 10/31/2009 Air Density: 93 Flowed: Stock Clone Head - No Mods - No Intake or Carb Lift - Flow (cfm) .050" - 17.0 .100" - 32.0 .150" - 45.0 .200" - 48.6 .250" -...

With in the next day or two I am going to be building a mild modified 5hp Briggs the list goes as such: 1. milled head (.067?) 2. ARC billet rod, 4.475" 3. 4 degrees of advance timing 4. carb 24/26 MM -I haven't decided which brand to go with yet, prolly what ever brad the junk...

Just picked up another project. Any ideal what it is? Funky looking foot rests been welded to it. I will take better pictures and a closer look at the bike when I get it home.

i've got a Briggs Animal carb spacer that's been modified to work with a 22mm Mikuni on a 5.5/6.5 clone. $5 shipped. cash only. you can see it in the attached pic. it's not as nice as the AGK one, but if you want cheap this works fine. edit: added another pic.

TT asked me to post these pictures for him on the site. So I got them and they look pretty good.:thumbsup:

$750 shipped, yeah I know it's pricey, but you can't beat the price for the power. Big bore thick sleeve clone block (2.817) 216cc Long ARC billet Rod 3.707" Wiseco .253" piston .276" AGK cam Dual Springs, locks retainers 28mm intake, and 26mm exhaust stainless steel valves Lighten ARC...

I have for sale a highly modified Baja Warrior. 196 cc engine (runs perfect), FRONT and REAR suspension, TAV2 Torque Converter by Comet. This is an absolute blast to ride everyone who has ridden it agrees. I have installed a New Comet TAV2 Torque Converter and tuned it to the engine. The...

Fresh, Never bolted on Big Valve Small Chamber GX200/Clone Head. 31mm intake, 27mm exhaust $250 (Mega Flow!!!) New, Still in route to my house. 1.2 Ratio Hunter Roller Rocker for the GX200/Clone $150 Lightly used, but fresh Ital Sistem billet carb, same as a Ibea butterfly gas carb. 1"...

Modified Thumb Type Installed W/ Welded End

I am going to build a minibike/yardkart briggs engine this weekend. Im going to sell it for $100 plus shipping. Putting this on here now so if anybody interested would like have extra done to it you can let me know. Here is what is will have as of now *Fully Rebuilt *New Rod *New Piston...

I started with one doodlebug christmas 07 now this is my upgrade modified 13hp electric start w/tav30

hey guys i have a engine that i need to sell. OldMiniBikes.com Forum - Powered by vBulletin OldMiniBikes.com Forum - Powered by vBulletin OldMiniBikes.com Forum - Powered by vBulletin OldMiniBikes.com Forum - Powered by vBulletin here are the specs. this engine was dynoed at...

I got this cat hustler frame from the woods and i made a back and a seat and rode it for a while but used the engine on my buddys gocart so it sat for a while. Now i want a nice rideable offroad mini so im fixing this one up. It had a long rake ont he forks which made it awkward so i cut about...

IPD Dave's Doodlebug with 6.5HP engine kit and some minor modifications