motor

It is currently not running, but it will run, the engine turns over fine. It has a Tecumseh 0HH55 6.5 HP engine. I have the seat foam, but nothing else; so what you see is what you get. The top frame bar has been slightly bent (about an inch upward) to accept the larger motor, but it has not...

I learned a lot about motors,chains and clutches on a bike very similar to this.I good friend found it and gave it to me...I plan to clean it up and let my grandson ride it.. WHAT IS IT? Thanks it is missing reg tag. Motor number is 7001163

I got three free motors yesterday. One is an older two stroke. One is a little Briggs that is mostly complete, and I got what I think is a side popper. It appears to be removed from some kind of snow thrower or old power tool. There are some numbers stamped in the top cover. It has a large...

I picked up a taco frame last year cause I wanted the shocks for another project , that fell thru.I think the wheels and tires may still be where I got it but there is multi choices. Does anyone have pictures and sizes? What motor would it have used.

Not a mini bike but it has a briggs motor. Custom Chopper O.B.O - $8000

Bonanza Chopper Mini Bike | eBay I have this bike Listed on ebay. If any one is interested i can do $800 cash or paypal for OldMiniBikes members. Pick up only. i will not ship it. I will not part it out. Price is firm. However if you dont want the motor and want the complete roller with clutch...

I saw this minibike on craigslist early this morning and called the guy, Went over at 7:30am, looked at it and bought it. Of course I haggled him down some on his price, because the bike is a hot mess. The motor is really what I was after. I can salvage the wheels, clutch and gas tank too. I...

I have searched till my brain hurts and i cant find a step by step video on how to measure for rod length. Does anyone have a link my motor is the hemi predator. Thanks in advance.

I just bought this about 2 weeks ago through craigslist. It looked horrible with a faded yellow paint job so I sanded and painted it orange. Had no motor so I put an 11hp tecumseh. I have the rear wheel and fenders. Anybody know what it is?

Hello all, I search a centrifugal clutch to put in my minibike but i don't found what i want cause in france there is not a lot of web sites or shops that sells centrifugal clutch... I want to put the clutch on this motor : Varan motor UP168 EQ1 So this is what i looking for : -420...

I have a Purple Duster Chopper that I bought about 10 years ago. It has everything except the seat and sissy bar. I tore it down and had the frame sand blasted years ago and haven't done anything to it since. It has the original motor, frame, handle bars, fenders, tires & wheels (original...

I am in need of a hs40 for a rupp roadster 2. Do get me wrong I'm not looking for the original motor. Just a nice hs40 tec to put on my rupp for winber. I'm not trying to break the bank if I get find on for under $100 I am just going to throw a predator on it. The motor I had for it ended up...

Guys, I picked this up from a member on here a week or so ago. It's a full complete bike but the motor needs a pull start and cup, and new coil. Other than that, the motor runs etc. It could use a rear tire as well. Just needs tweaked and some TLC and it'd be a good running big tire bike. $300...

Picked up a few old gems out of the local salvage yard on the weekend. Older fellow brought in 3 old bikes, Yamaha late 60 enduro?, 1978 Yamaha YZ80 in amazing condition still has original decals and plastics, and this mini bike that after several hours or searching the web im still unsure what...

Looking for a side fill tank for an HS40 (for an ST100 project)... in good condition, would prefer metal, but if all else fails, plastic would be fine till i can find a metal one... motor should be silver when finished... current motor has a plastic center fill tank in great condition (new)...

I just saw that there was a predator 99cc engine (item# 68124) and I called they were discontinued? now you get the 79cc predator, whats the difference? Who is running these on a minibike? I only ask because I am building a very small minibike and every motor I have is too big for the frame...

Just got this motor in... supposed to be a raptor, the numbers on the cover are correct.. the inside does have the bearings on the side cover side, etc... havent torn the motor down, want to fire it first... supposed to be a fresh motor... hoping to hop it up a bit on a budget... in between...

Sold my Harrison project and was going to use this motor on it, so now I guess I'll sell the motor. I've had this motor for a few years and it's been on a couple of different bikes. Runs like a raped ape. Tons of compression. Probably just at the break-in stage. Maybe has an hour of running...

I got a bike at the Ann Arbor show with an OHV Tech motor that I think is a 6 or 6.5hp.The motor will start if I shoot gas in the carb but stop shortly after. The numbers on the carb are 5243. I know nothing about these motors--does it need a carb clean or replace? It is the primer ball type...

This is a recent barn find. Wondering if anybody can make an educated guess on the approximate year? Would this be completely home built or possibly based off plans from a magazine? I'm not sure what brand motor is on it - maybe a Clinton? The tires are solid rubber. Thanks!