pipe

  1. 86 iroc

    What pipe to use for exhaust ???

    So I will be makin my exhaust next on my db . Its got the typical HF 6.5 . I want to know what has worked out in the past for you guys . I have a bender , welder , and one hell of a metal twisting mind so what pipe to use is the only issue right now . Thanks in advance ! :thumbsup:
  2. miked

    sachs exhaust pipe

    looking for a sachs 50cc exhaust pipe for a fox sundowner havent been on here in a while have had some major computer troubles upon other things pm me or email me miked@wyan.org thanks
  3. ross

    New from NC

    Hey guys, I just found this place and I had to join. Mini bikes are the best. I ride mine on the streets in NC.. I've got a Baha 196'er. It came from an old building in Chester,SC. Although it was far from running cond., it looked like a fun project. I instantly tore it completely apart...
  4. machinebike

    Home made exhaust pipe, without welding...

    I was wondering about using a piece of radiator hose to connect two pipe pieces together, Can radiator hose withstand the heat? if it could, why not run a piece around the bends? Also, at hobby shop for rc vehicles, there is called a exhaust coupling to connect the manifold pipe to muffler...
  5. josh

    pipe

    i need a stright pipe for a tec ohv 5h :weld:
  6. B

    S Shaped muffler pipe for vintage Tecumseh?

    I need a little help. Does anyone out there know where to get one of those older S shaped exhaust pipe mufflers that used to be on the H30 H40 Tecumseh engines back in the mid 70's? I cant seem to locate anyone that may carry them.
  7. O

    Super bronc pipe

    Hi. I need a 8hp tecumseh pipe, preferably a very loud one for my super bronc, any suggestions as to where i can find one?
  8. C

    Need Tecumseh H50 Intake Pipe, Carb, Exhaust

    Need a original carb and intake pipe for a Tecumseh H50. need an exhaust, but I do not know what type came on this bike--it probably was short as there is two jackshafts (similar to a Tote Gote). I also need the screen behind the recoil. Thanks. Brian
  9. NewAge

    Exhaust pipe science

    I am interested in understanding what effects exhaust pipe length has on the power curve. I noticed that the Mansville crew use longer straight pipes and I am assuming that it makes better power in the higher rpm range :confused: How about someone educating me on this one :biggrin:
  10. delray

    header pipe

    i have couple questions for the guys that have purchase aftermarket header pipes for honda 6.5 or clone 6.5 motors. size of the id and od of the pipe and the thickness of it too. for example .065,.069,..etc... or do they gage it 18g or 16g..etc... also do you know if it is seamless weld inside...
  11. Parliament

    Exhaust pipe with flanged end.

    I ordered a pipe from Kart Pipes - Your Go Kart Pipe Home with a flanged end. It looks awesome. I have not put it on yet. Will I get more power? What is the piece of wire they sent with it for? Do I need to modifiy anything else to accomadate this pipe? The attached pic is NOT my mini...
  12. Cotmullion

    Custom straight pipe

    I want to build an 18 inch straight pipe from sheet metal, rolled to fit around the screw in exhaust peice which fits into the exhaust port. This is then going to be Jubilee clipped to fix it. Does this sound promising?
  13. F

    Intake pipe on a HS40

    Hey guys, I have a HS40 off what I believe is a Rupp minibike. On the minibike, the motor was tilted forward so the intake pipe is angled. I'm putting in on a custom Trike (well, actually the same frame but WAY modified) so the motor is going to sit flat now, so I need a pipe that's not angled...
  14. D

    need exuast pipe 4 my dirt bug motor!

    I have a baja dirt bug with a 2.8 hp honda clone=stock motor the exuast goes all over the rear fender if u have any pipes 4 sale or any ideas reply:weld:
  15. NewAge

    Where to buy a trick carb and pipe for my 6.5 Lifan clone

    I would like to install a big carb/pipe combo on my new motor, I'm not expecting much gain but I would like increased rpm and better flow than stock. Anybody know where I can purchase these components new, ready to bolt up? also what brand of clutch offers the smoothest operation, I am sick...
  16. mower_014

    mower_014

    new exhaust pipe made more high end torque from 35mph to 47 mph woo
  17. more pipe photos

    more pipe photos

  18. Columbia Mini Bike Exhaust

    Columbia Mini Bike Exhaust

Top