pressure

  1. 93notch408

    predator motor TOO MUCH CRANKCASE PRESSURE HELP!

    so i just put a fuel pump on my bike and the pulse fitting goes thru the valve cover...i took it for a spin and i noticed the bike was spraying oil out of the little wire hole that the low oil sensor useto come thru the block and i shut the bike off and i heard air seeping out of it so i took...
  2. rollin2

    Pressure cooker

    I love this thing!!Just cooked,turkey.greenbean cassarole,home made candyed sweet potatoes,regular mashed potatoes,homemade giblit gravey and brown and serve rolls.In 1.5 hours..these pressure cookers are the BOMB!!!! Forgot to mention that the turkey was a 15 pd bird.
  3. FirePowerMinis

    High lift, low pressure springs?

    I plan to run 1.3 rockers on a stock clone cam for a hi-torque/lo-rev build. What springs will take .290-ish lift and not wipe out a stock lobe? I guess I can have the cam MicroBlue'd and run 26lb, but want out cheap :)
  4. drossman

    Will a Pressure washer 6.5 Briggs work

    So I scored a pressure washer with a cracked pump he forgot to turn the water on. It's horizontal shaft so will this work?
  5. jamestap1980

    Tire pressure lowdown

    Okay so one day I realized before doing my clutch mod the damn db wouldnt barely move... I checked the pressure in the tires and it was 15psi! I was like holycrappo. So i filled them to 35psi and bam my little db started to move with my weight on it not fast (damn im 280)) but moved at...
  6. freezerburn

    low pressure fat tire patch thread...

    ive heard that the regular old slime is good on these. i hate not being able to patch after the stuff is all in everything though. how about those black gummi plugs? inside patches? any preferred patches you all like most? temporary, permanent or emergency?
  7. M

    9HP pressure washer motor

    I was hunting around on craigslist and I found a 9HP B&S pressure washer motor for 100 bucks. Will this motor work OK on a mini bike? I have never had any experiance with a pressure washer motor, just snowblowers and rototillers. Any tips? Thanks everyone!
  8. M

    Best tire pressure and headlight?

    What kind of tire pressure do you guys run? The two I just bought still have the stock motor on them so a little higher will probably reduce friction. I think the owners manual says 4 or 5...seems a little low. Also, is there a good quality headlight kit for these? My kids want to ride them...
  9. V

    Honda GC160

    I have a honda gc160, i don't know if it has oil shut off switch if so where? But the motor does have oil in it but i heard they can be really sensitive. The engine will start and run fine with choke on then once warm whether choke is on or off the engine will start to run rich and spit black...
  10. thebronc4019

    Harbor Freight Pressure Blaster Upgrade

    15 Years ago I bought a Harbor Freight pressure blaster to build my "Pro-Street" 1967 Nova. Since then I have used it on a number of car and minibike projects. I originally put a better water seperator on it and re-welded the leg on the bottom of the tank. I have had to replace the ball valve...
  11. S

    Adding throttle to pressure washer tec 550

    What components do you have to change to make a fixed throttle engine to a variable throttle?
  12. J

    How do I remove a pressure washer HUB from the Crank?

    I have a B&S 5HP I/C that was powering a pressure washer pump. Pump went bad early on. Today I removed the engine from the pressure washer cart & pulled the pump off. There is a piece that I will call a hub on the output shaft that needs to be removed. (See pic below) Anyone know how to...
  13. MINI-MATIC

    Correct tire pressure

    Im in the process of restoreing my EEL WHEEL, locate in "my pictures".My question,what would be a good tire pressure for my wheels.The rims are 6 inch,one piece tubeless construction.The tires are old,in great shape,Good Year 13x5.00x6 2 ply terra-tire tubeless,these are turf tread tires from...
  14. B

    Doodlebug tire pressure

    I am running 5psi in my tires and they seem alittle soft for me. What are you guys running and can I blow the tires up higher being 250pds. I:drinkup: think 10psi would be good to go.
Top