read

8. Non Starters & Drop Outs will be deleted to avoid clutter. This means if you do not post once per month minimum or make an entry post by February 1st 2013 your entry will be deleted. To be clear on this, you must have 1 post in your thread at least once every 30 days. If you go longer than 30...

Hey guys, I've been noticing some of you have been forgeting or not knowing that you have to have a secret item (can of pop, beer, etc.) in your build off entry pic. It is partially my fault, but anyway..... Every build off entry picture must have a canned beverage amongst the pile of...

I recently bought a 3rd gen predator and it was acting funny, so I ripped of the side cover and looked at the timing, two notches off:( so I fixed it and and well at it grabbed that crappy low oil sensor outta there. I threw it back together and now it won't start? It's getting spark and gas and...

I just bought a race cart frame and the engine Mount is on an angle? Why is this. Thank you

Democratic Republic of Congo: Lubumbashi to Kinshasa - Expedition Portal If you have time to kill this is a very good story about a guy and his wife traveling across the congo

When I try to use the quick links to mark forums read, all i get is this message. Your submission could not be processed because a security token was invalid. Is this normal or is there something I can do to fix this?

Here are some pretty simple rules. Post price, location, payment and shipping options, and don't forget - pictures are not required, but will greatly help your sale. Please don't post a ton of items for sale in the same thread, unless you're parting a bike out or similar. Posting "Or...

Here are some pretty simple rules. Post price, location, payment and shipping options, and don't forget - pictures are not required, but will greatly help your sale. Please don't post a ton of items for sale in the same thread, unless you're parting a bike out or similar. Posting "Or best...

Here are some pretty simple rules. Post price, location, payment and shipping options, and don't forget - pictures are not required, but will greatly help your sale. Please don't post a ton of items for sale in the same thread, unless you're parting a bike out or similar. Posting "Or best...

im a millwright and do a fair amount of welding, i work in a billet and ingot conditioning mill where they grind the billets with 200 hp track grinders. the steel is high alloy , stainless etc. the air quality is very bad on the best days. well to get to the point, we were installing a new 54''...

Below are the rules everyone kind of agreed on, and then my rules added above since they're shorter. This forum is for the build off only. My rules 1. If you don't like it, don't build anything. "The Rules" 1.Start date Jan 1st 2012! Deadline for entry post February 1st 2012! If we do not...

Me, oldschool. Very knowledgeble and articulate. And of course TRK, never know what you are going to get usually a good belly laugh.

yesterday i started up my green baja racer, and it started fine 5 or 6 times then i dedied too take a quick brake so i turned it off just parked and sat for a few minutes, then after my break i got back on and it wouldnt start it has never done this, its in the greatest shape the motor has...

Hello too all the members of OldMiniBikes this is a great site I decided too just get use too the site and explore everything I could think of before joining and posting a 'im new thread' I hope to talk too many of you too learn as much as possible about all types of mini bikes. I figure ill tell a...

USPS - Track & Confirm

From watching this video, you can see why the U-2 is considered the most difficult plane in the world to fly. Each pilot has a co-pilot, who chases the plane on the runway in a sports car. Most of the cars are either Pontiac GTO's or Chevrolet Camaros - the Air Force buys American. The chase...

Ok, I have read tons of information, and learned a lot. I like the jack shaft solution to the tall gearing on a stock DB30/MM Rivet. What would a 10 tooth clutch do in place of the jack shaft? It would be cheaper---$30. Correct me if the stock clutch is not a 13T. How about a 10T clutch plus...

Hello, Looking for anyone that can send a digital photo of the original parts used in the first gear of the 2 speed unit. I know the sprocket and one way bearing can still be had.( I have a NOS sprocket) If my memory serves correct their was a bearing race that mounted on the 5/8 " jackshaft...

What can you experts tell me about this plug? I don't really know the difference between fouled/not fouled/too rich/lean etc... Thanks its out of a clone with .92 jet, 28deg timing, 18lb springs

Since there has been a few post about this subject lately and with a few things that have come up, I am making this post. We, at OldMiniBikes, suggest that when removing your Governor on your 6.5 hp clone or True Honda engine (including all engines discussed on this forum), that you take precautions. By...