removing

  1. mmisterbungl

    Dumb to Briggs - removing carb?

    I recently acquired a mini bike with a 5HP flat head briggs. I want to remove the carburetor to add a tillotson so that everything fits in the frame. After studying the way the bottom bolt/screw of the manifold is hidden behind the gas tank, i'm not sure how to approach removing it:shrug: The...
  2. Von Zipper

    Removing tire labels

    Has anyone tried sanding or using a knife to remove the manufacturer's name from the sidewall of a tire? I'm not real happy that I have chen shing on them.
  3. vette66_00

    Removing governor on your engine and OldMiniBikes !!! Please read !!!

    Since there has been a few post about this subject lately and with a few things that have come up, I am making this post. We, at OldMiniBikes, suggest that when removing your Governor on your 6.5 hp clone or True Honda engine (including all engines discussed on this forum), that you take precautions. By...
  4. B

    Removing Govern Question

    Hey I am thinking about removing my govern tomororw. I am wondering is it worth it? Will i notice major increments when i do this?
  5. J

    Removing a GX200 liner

    I have found a supplier of liners to convert a gx200 to a 3" bore, how do you remove the old liner, is the block cast around the liner during manufacture, or is it pressed in after, do you have to machine the old liner completely away. Could anyone shed any light on this for me please. Jonboy
  6. awkwardkitten

    Complete guide to removing governer on a 5 Hp Flathead (with pics)

    I Ripped this off of DIY Go karts because I thought it would be a good contribution to this forum. CREDITS TO SOLOMON FROM DIYGOKARTS FOR WRITING THIS THREAD. __________________________________________________________ WARNING-DAMAGE CAN OCCUR TO YOU AND ENGINE BY DOING THIS MOD Okay, I...
  7. awkwardkitten

    Complete guide to removing governer on a 5 Hp Flathead (with pics)

    I Ripped this off of DIY Go karts because I thought it would be a good contribution to this forum. CREDITS TO SOLOMON FROM DIYGOKARTS FOR WRITING THIS THREAD. WARNING-DAMAGE CAN OCCUR TO YOU AND ENGINE BY DOING THIS MOD Okay, I have made a STEP by STEP tutorial for removing the governor on...
  8. james c

    removing primer from fiberglass fenders

    how do you take primer off fiberglass fenders without removing the original gel coated paint?
  9. trepanned23

    Removing valves, 5Hp Flathead

    Guys - Is there a relatively easy way to remove the valves in my 130202 0356 Flattie without getting a special tool? I'm waiting for my rebuild book but the motor just came from UPS and I couldn't resist opening her up, It took all of 30 minutes to almost completely field strip the motor but I...
  10. milo raptors

    Removing seals

    how do you remove the seal on the flywheel side of an old 5hp flat head
  11. B

    removing an old clutch

    whats the best puller to remove an old stuck on shaft clutch?
  12. larkija33

    Removing Rust from Wheels?

    My front wheel's all rusted on this one spot, like water dripped down and began to rust it. But I have no clue how to get rid of it without damaging the wheel. :grind: Any ways I could shine it back up, preferably if I don't have to take the entire wheel off?
  13. M

    What's the Hot Tip on Removing the Governer Gear???

    I am about to remove my 2nd HF clone governer. The 1st one I did went fine but it was a :censure: getting the plastic gear out, because of the split ring keeper, of course. So, what is the hot tip on getting them out?? :hammer: a bigger hammer, perhaps??.
  14. G

    Any problems with removing the compression release?

    Engine is a OHV 6hp powersport. Was looking at the release lever on outside of the cam gear, that thing comes out way to easy ! Anyone have one come off/loose while running? I emagine to cover keeps it from coming all the way out. Will removing it cause any balance or other problems? Not a...
  15. kevotron

    question about removing max torque clutch

    I am trying to get this sucker off. I have hunted around and saw that using a gear puller is a good way to do it, but I keep hearing about set screws and I dont see any screws at all. Can anyone lend a hand to a noob and help with this, I feel like a chimp banging a coconut against a rock trying...
  16. M

    removing old paint off tires ??

    Does anyone have a way ,besides using gasoline,to remove old paint off tires?A few of the project bikes i have have old paint from when owners just bombed the bike with a quick touch up. Thanks
  17. A

    Removing Sheet Metal on Clone Cylinder

    I have a HF clone and had to remove the shiny plated sheet metal shroud that covers the bottom side of the cylinder and attaches to the pull-start housing. I need the clearance or it will hit the driven pulley for the TC on my Arctic Cat Climber. It looks like the flywheel fan blades push air...
  18. mike04

    wen removing governer..throttle problems

    ok guys i remove the governer from my 6.5... i opend the motor and remove now i don't have control of my throttle what do i got to do????????DO I HAVE TO REMOVE THE COLANT THING ON THE BOTOM OR JUST THE governer>>>??:confused:
  19. Strigoi

    removing tank brackets?

    i'm getting a new tank in the next few days (thanks GTO) and want to remove the brackets for the stock tank. what's the best way to go about doing this? just cut them off and grind shit down? that's what i'm thinking for now. i know some of you guys have done this, so i'd like to hear how...
  20. X

    Trouble removing clutch

    So I have this H50 with lighting coil that I bought from this kid, and it has a cent. clutch on the shaft. I am going to be putting on a TC so I went to remove the clutch, removed all set screws, and the thing will not budge. I have loaded it with penetrating oil which has been sitting in...
Top