Hi all. Just picked up a db30 straight frame and the rear wheel has quite a bit of wobble to it. It's also missing the chain guards too which seem impossible to locate for the older model. Anyone have anything laying around??
I need a DB30 rear rim. I'm building a high performance DB30 and will use the rear rim on the front to have a front brake system. Right now the rims are on back order till Nov. I want to ride before then. text 479-719-1902 thanks Clint
Went a different route with my new spyder instead of a built up Briggs I threw I built up predator on it a new seat front rim and tire and back slick.im still looking for a 5 spoke rim for the back and trying to figure out wat im gonna do for breaks. I like the look of the stock sprocket makes...
Horstman split sprocket #35 58T-$5
Rupp forks (uppers)-$35
5" Manco rim set w/ sprocket and brake-$80
4-1/2" brake brand new never used 5/8" bore-$25
4" manco rim w/tire -$30
Sensation rear wheel w/sprocket-$55
Arco ez rider handle bars painted black-$20
Prices not including shipping
Why is it such a pain to get the haves of a two piece rim off the tire on a mini bike?
In the process of mounting a new tire on a new rim I put hole in the tube so now I need to get the rim halves off the tire to put in a new tube and it is proving to be almost impossible. Before mounting...
Just picked up a nice frame with some custom fabrication from a forum member. Really nice guy by the way.
I want to put some astro wheels on it but I am limited with size because of a custom scrub brake.
I would like to get some Astros for it but need a 5" rim. I like the tri stars, but...
I need some info . OK i wanna use the asuzalite 5" rims. Im wondering what regular sprocket that will adapt to these type rims not a drum. Basically im going to shim from the rim to a sprocket with some type of adaptor so i can use a caliper. Any help will be great. Thanks
I wanna use the asuzalite 5" rims. Im wondering what regular sprocket that will adapt to these type rims not a drum. Basically im going to shim from the rim to a sprocket with some type of adaptor so i can use a caliper. Any help will be great. Thanks
Wondering what the heck this wheel originally came off of or if it is an aftermarket one? It came on a (pretty beat up) 1967 Taco 22 I got a while back. This was the back wheel and has a sprocket on the other side (that has had a lot of holes drilled into it (sprocket not wheel) from various...
Can someone tell me how I should go about getting this rim disassembled? It has the four bolts running through to the other side with washers and nuts keeping it together. I have removed the nuts but can't get the rim to separate. I have the studs soaking in PB Blaster as well as the axle. It is...
I have a 4 inch tire and rim i have no use for. Rim has 5/8 bearing and a grease fitting. Tire is a general 410/350/4 . Tire has some cracking but holds air for over 4 months now. $20 plus, $18 shipping usps large flat rate box.