salsbury

Just picked up a Briggs with a good salsbury 300 series clutch on it. I can't figure out how to get it off. Seems stuck on there pretty good. I've tried several methods and I do not want to force it and break it, any suggestions? Thanks ~Matt

Salsbury Torque Converter Clutch 1" Bore Appears to be New Old Stock ( N.O.S.) $80.00 Delivered

found this salsbury engine today , i believe its a stationary unit . anyway thought i would share , ejoel

If your wanting NOS original Salsbury 1" bore driver, like BMI sells for this is not comet/salsbury $165.99 I believe this was made 9/85. $225.00 shipped:thumbsup: These 2 pic's below are of what bmi sells

Horstman Jackshaft 7 inch driven pulley, appears to be 5/8 belt, has bearings, hangers, 41 pitch sprocket, spacers.. As pulled from gokart. Clutch probably needs freed up but should work just fine... 50 plus Salsbury 7 inch driven pulley, appears to be 3/4 belt, 3/4 inch bore, might need to...

im fed up with the TAV1 on my rupp locking up and not working right, does anyone have a 20 or 30 series TAV driven or i seen someone here that uses a salsbury unit? im looking for anything, thanks

Wanted: NOS, new or very nice Salsbury 330 clutch for my 5hp Tecumseh with 3/4" shaft. Or, where to get one. Thanks

Hi guys I'm new here. I an currently restoring a herters trail and have a question about the 330 driver clutch. This clutch was all stuck together I got it apart and I need to know if the brass idler is free spining or if it is supost to be fixed on the hub? I cant for the life of me get it...

Looking for a salsbury 330 driver clutch and also looking for a dellorto ua19s I got almighty cash and minibike stuff to trade Pm me on here or call me at 708 469 8189 Gustavo Thanks guys

6" driven, 5/8" bore. 3/4" bore on the driver. It looks like there are some parts missing, and there is a big chunk missing on the one sheave. I don't know any thing about these what you see is what I have. $60 bucks shipped, I prefer USPS money orders. Thanks

Ill pay today!!! I need a complete clutch setup. including a backing plate, drive and driven clutches, belts and hardware – the whole shabang good used Depco or Salsbury driven clutch or comet 30 My specs: 3/4 bore 5.5 Honda clone its for a little tote got i have made and am...

Hey there guys im looking for a salsbury 330 or comet 340 which I believe are the same thing just diffrent name I plan on using it on my Rupp all advice welcomed looking for 3/4 shaft and keyed please I got cash or alot of minibike stuff to trade Heres my number 708 469 8189...

[/img][/url] these clutches came in a lot of tote gote parts but i have not seen any on any bikes? can anyone tell me what they came on?

thought someone might be looking for one of these, found them today, seem really cheap for NOS parts... great part to restore that certain bike.. NOS Torq Converter Driven Minibike/Go Kart SALSBURY 330 - eBay (item 370398681327 end time Jul-19-10 00:50:11 PDT)

If this is a stupid question, I'll just have to live with it! Does anyone have any idea if a 20 series driver will work with a Salsbury 330 driven? I've got both (from eBay) and have a 20 series belt coming. Looks like it would work... The set up will likely be used with a 7hp Tecumseh...

Help, I need new liners for my salsbury 330 3/4 in shaft clutch for my arctic cat climber. Also need the center 'button' that keeps it centered & the bolt runs thru.Anyone know who still sells these or hAS THEM FOR SALE?? tHANKS, mARK 248 457 0291

Hello all, I need a Salsbury driver for a little Tote Gote 300. I has a 3hp Briggs with a 3/4" shaft. I have the original clutch, but it is pretty roached. Thanks