I'm working on a Toyoco Alpha 350 project and am interested in either repairing or replacing the shocks on the front forks. The only picture I have is the overall shot of the bike mocked up after I first got it last year. Not sure if there are any parts available out there or if I'll have to...
I have chopped up the DB30 and adapted a rear swing arm with rear shocks. I need help sourcing out a proper shock. With the two shocks in place it is too rigid and the spring rate is too high. I didn't realize that the shocks are rated at 520lbs a piece, with one shock in place it is perfect...
Anyone know if the rear shocks are essentially the same on a Superbronc as the Rupp shocks? They look exactly the same, not sure if they are the same length or not. The one I purchased a while back did not have original shocks.
Does anyone know which bushings on Suspension Restoration Bushings - Polyurethane shock eye bushings
I need for the original 1969 Rupp Roadster shocks?
New Old Stock rear shocks.
Some scratches from being moved around.
11-3/4" center to center mounting. Uses 3/8" OD bolts.
Springs are 1-1/2" OD.
$35.00 Delivered.
Never seen this style before.
@@@@End of Sale@@@
Sold...Sold.......Sold.
I was wondering if it would be okay to use a wire brush on a die grinder to clean paint and a little bit of surface rust off of some shocks and springs that have a chrome-looking finish to them? or will the wire brush damage them? FYI the wire brush isn't really stiff.
#1 White HS50 gas tank with cap.
Measures 6 3/8" x 4 5/8" x 4". Top mounting holes measure 4 5/8" center to center. Bottom mounting holes measure 3 5/8" center to center.
$25 shipped
[/IMG]
[/IMG]
#2 Bird Rear Shocks.
Came off a Sears Roper and still have compression. Bushings are in ok...
What Bonanza Rear Shocks are these. They have about 13-5/16" eye to eye. Are they from a BC1500? I was looking for some BC1300 shocks and I think I got the wrong ones. :doah:
Thanks,
Adiel
Guys:
Just so you know(I've had a few inquiries)we are no longer making or supplying fork lowers/parts,rear shocks/parts for the Taco early models. We ran out,and it's not logical to make another batch. Maybe in the future when the economy gets going.
Until then,thanks!
jw&TM ent.
Here's a couple sets I have. They will all need some work..misc dings, etc.
There is a how to on disassembling these on steenstacominibikes.com
one set looks like the chrome may be savable, but will need to figure out something for the missing bushings on one of them. Shouldn't be a big...
These are NOT Taco Shocks!!!
There Sebac 12
I purchased these many years ago when I first started getting into mini bikes..
Thinking they were Taco:doah:
They have been sitting on a shelf ever since.
I brought them home and cleaned them up gave them a fresh coat of gloss black paint and...
I'm looking for a pair of original "Bonanza" BC rear shocks in good looking and good working condition. need to be 10'' eye to eye with all rubber eyelets and bushings , I believe the eyelets are 3/8 dia.
Looking for a reasonable deal. let me know what you got. thanx.
WTB NOS Shocks.
These shown were made in Italy and were used on several different mini bikes, including Cat. Polished or painted, I would be willing to purchase.
Would also be interested in other NOS shocks under 12" eye to eye.
Thanks,
Casey Davis
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.