side

  1. jeep2003

    Tecumseh Tank white side fill plastic

    White side fill tank with brackets, heat shield, screws and cap. Tank is yellowed and has some scuffs. $25. shipped
  2. Not so mini bike

    Side popper

    Found this in a stack of briggs I picked up. Don't think I have the shroud. Was told it is a h25. Not sure the year. Any way of telling with out the shroud?
  3. nds1968

    Crankcase side bearings

    I've been looking for a crankcase side cover with the tapped holes for a 1972 5hp. I see them listed as large or small bearings for the crank. So is the difference just the bearing or is the crank also different? Thanks, Nate
  4. Mnr81

    H35 Side Popper 5 hp???

    Hi Guys, I pulled this engine off an Ariens snowblower. I though it was pretty cool with the electric start so I cleaned it up and painted it. I had a hard time identifying it bc I couldn't find any numbers...but I've heard from a reliable source that it's a H35 Side Popper??? Can anyone...
  5. ZR9B

    side popper

    I was bulls#*ting with the air compressor repairman a week or so ago...turns out he has some minis ...told him to keep an eye out for an old side shaft... this was on my bench when I got out...step shaft looks like trouble ..nice metal tank though
  6. I

    billet side cover for hemi predator

    So a hemi predator needs the Honda billet side cover, correct?
  7. S

    3.5hp side popper exhaust help

    Any ideas on a trick looking exhaust for a 3.5 hp H33 exhaust like a cast Reed muffler?....this is the best I can come up with thanks
  8. J

    Snagged this off the side of the road, seems sketchy though? What is it?

    Supposedly this is an older Harbor Freight engine that was installed, it runs strong and is fast, faster than I was comfortable with with the sketchy seat setup. There is no badge of any sort on the frame, I assume it may also be a knock off of an older bike. This suspension setup...
  9. SimpleTom

    Skat Kitty with side car on ebay

    Check out the side car. This one was definitely used by a Shriner clown. Vintage Mini Bike Shriner's Skatt Kitty Mini Bike with A Side Car Project | eBay
  10. Briggster

    WTB: 6.5hp greyhound side cover

    I'm looking for a greyhound clone sidecover. It is a bit different gasket seal in the cam area. Here is a picture of what im looking for. Will give up to $30 shipped A
  11. Dragbikemini

    Predator right side tank and spares.

    This is it. Last of it. Rightside fill tank old style. Rare and fits well on minis. New take off dished piston and carb insulator with gaskets. Brand new thin metal head gasket for 70mm bore.Tank has no dings or dents but has nasty scratch on top. Also some owners manuals. Hemi manual still in...
  12. 6.5hp Shinebox

    Tecumseh hs50 side over

    :doah:How the hell do I get the crank case cover off? Do I really have to remove the flywheel first? Seems like it gets stuck... Am I missing something here? I just wanted to inspect the inside of this engine clean it out etc,,,been sitting who knows how long at least 2 years then another...
  13. Diabolus

    H30 side exhaust question

    I have a couple H30 Tecumseh engines with side exhaust ports. I've checked OldMiniBikes warehouse and cannot seem to find any header style exhausts for these engines. Can anyone recommend another place to look?? The stock exhaust blows right on the riders leg.
  14. M

    Can some-one ID these side / number plates

    Can some-one ID these side / number plates. Thanks
  15. 125ccCrazy

    small briggs side cover with sight glass / Rupp sprocket

    2-3.5hp briggs side cover with sight glass... this would be cool for a demo engine so you can see the engines internals in action or even on a bike..maybe a rat bike? $10 plus shipping Rupp turbine 6 bolt sprocket 72 tooth 35 pitch in good shape... some chain rash on one side but not...
  16. Loren65GS

    HS40 Crank and side cover

    Started to assemble my engine and 2 speed clutch.:sad: There is not enough length to the pto to support the outer clutch bell. The pto portion of the crank shaft is 2 3/8". I need the longer crank and correct side cover for my HS40. Anyone have something for sale? Thanks, Loren
  17. Dragbikemini

    Predator right side fill tank. Non vented.

    $25 plus shipping. 5lbs from 10509. No dents or dings. Has some scratches. Paypal. Thanks.
  18. R

    8hp Briggs flywheel side pulley

    Looking for a pulley that would have bolted on the flywheel side of an 8hp flathead Briggs. 6hp or 7hp would work as well I suppose. If one of these exists for a 5hp I'd like one of those as well. These were for those starter/generators. Let me know what you have.
  19. CarPlayLB

    NOS TEC HS50 side fill tank

    I have a brand new side fill tank from an HS50. Comes with bottom bracket and bolt, $25.00 plus shipping...or make an interesting trade! DOH! Pic problem
  20. E

    Tecumseh Side Exhaust

    Just got a ruttman with a Tecumseh motor on it and im trying to figure out what size it is. Cant find any numbers on it as of right now. It has the side exit exhaust. The engine is red and the fan shroud is white. Sorry i dont have any pics right now. Hope someone can help me out.
Top