single

I have a briggs vanguard 14hp engine and it has an oil pump inside of it plus the oil filter on the side. I was wondering if it would be possible to convert it from a vertical to a horizontal and what is all involved

Sportsman

Sportsman

Single stage straight header for clone (Has a pic now) Bought this for my predator and it matches up fine but it won't fit on my Sears roper since the frame is too narrow. It's still new since I've never fired up the engine yet. From the end of the pipe to the tip of the flange it's 15". I'll...

Interesting vehicle from Portland, Oregon. Turn Heads with this Self-Balancing Single Wheel Electric Motorcycle : Discovery Channel

sorry that I don't have a picture of the left side of this little bike - got it last year and a paper tag said something like" 525cc, 14HP, 60+mph!" its got some slop on the jackshaft - I think the shaft's bearings might have around 1/16" -- maybe a hair more play in their carriers - is that...

hello i just picked up a 1968 rupp xl500 (from the original owner) that has been sitting in a barn since 1972. and i see they re-pop the 2 speed setups. how much better/faster are they compared to the single speed. thanks i will post pics once i figure out how

I've been playing with my tav that I bought on e-bay and installed on an Azusa mini bike with clone motor. I'm having trouble getting the tav to engage at a low enough rpm to prevent it from lurching forward abruptly. I also have an older original comet tav on an invader go cart that works...

I have an old minibike with a B&S 3hp engine. I just bought a single wire kill button from OldMiniBikes warehouse and can't get it to work properly. I mounted it on the handlebars and attached the wire to the spark plug wire. When I try to start the bike it's a no go. If I take the kill wire off of the...

:lol: This poor thing was smashed all to hell completely beat but isides were nice.. Sleeved single big bearing with DU bushing up front, great motor... So I got it all squared away to find the crank was bent to hell, so I had to change the crank too, so now it's got the old school hardened...

Something I forgot I really need! The single suspension spring on the forks for a Cat (350ss is what I am working on), Good looking chrome needed. My cups are passable the spring is flaked though. Will be more that happy to "trade in" my old one if you wanted it, its in fine working order...

looking to trade this off for something, i paid 250.00 and just dont think ill get to it. its setup for a motorcycle engine and has a hand shifter and clutch pedal

Race Head, Level 4 Cylinder head (GX160 or 200 Honda Casting depending on desired compression), Ported and Milled to choice of compression ratio, Stainless high flow valves, OVERSIZE 27.5 mm intake w/ 4 angle valve job, Choice single (26lbs) or dual springs (55lbs), Aluminum Retainers w/split...

Ok, so I have another dumb question. But thank God you guys are tolerant. I was going to wire up a new motor with the standard two wire toggle switch, but want to instead use the little single wire push button switch you can buy from Northern. So my question is this....if the Northern push...

looking for jlo parts or a whole engine

Just wondering if there were any members on this sight raising thier kids without thier ex-spouse in the picture? I got full custody of my (then 16) now 20yo daughter my now 14yo son and my 6yo daughter four years ago after thier mom apparently lost her mind!

Got another DB30 today to keep the first one (green bike) relatively stock for the boys as a learning tool. The green bike has a pretty good running engine, and I'll keep the other engine as a spare. Also picked up a 6.5 HP motor at Harbor Freight today, and ordered a max torque clutch for the...

i still dont have a definitive answer as to what this bike is.several people have tried to help.but,when i look at pics they say it is i always see something to say it isnt it.so,if anyone has seen this bike or has a pic that matches.please put my weary mind to rest.i just want to know exactly...