socal

Here is an old beatup Nova minibike frame. It needs the frame tube welded underneath on one side, needs an internal expanding drum brake, a lot of sanding & some paint, needs a new set of handlebars welded on to the handlebar bracket, rim bolt on front rim is really stuck and tire needs...

Hello all, I'm new here so figured I'd introduce myself. Reason joining was I dug up my Dad's old mini bike (30+ years old) from the garage the other day and figured since my summer vacation has just started I might as well put my time to good use restoring/rebuilding it. From what it looks like...

JLO Rockwell two-stroke engine. (May fit Super Rare Hot Shot cycle) Comes with torque converter Driver clutch, and "throw-away" Tricart frame. $300.00 in my hand, at my house: . . . Bring a truck: Approximate mfg date is 1967.

.....Almost ready to ride. May be ready by the time you bring me money: . $350.00 in my hand, at my home. . ........Just added a fiberglass cover, good used Max-Torque,new chain, and a fabricated kickstand. Same price. . ........I'm not as dumb as I look, I know you guys are...

i'm takin a camping trip in june... are there any places not too far away from socal that have minibike trails? needs to be tent friendly and boat friendly is a plus. thanks

HPE Muskin CAT minibike. Extra welds on frame. Running. Manco 5" rims. 2hp Briggs. Pick it up at my place. $100. .

All chrome "American" minibike. Rusty. Will start, but carb needs work. 3hp Teke. Pick it up at my palace....I mean place. $125.00 . Yes, I have the torn seat for it.

Just the rear section of a Bonanza frame. $100.00 or trade for Flexo: .

wtb clone engine and a nice frame. the cheaper the better and prefer local but open to outside parts. thanx

Rupp Frame #1: $20.00 . Rupp Frame #2: $10.00 . Bandit Frame: $20.00 . Tote Goat? Frame: $10.00 . Sorry, No shipping available....Must be picked up in Los Angeles County.

This is pure Azusa Junk. Found out it's not a clone engine. It's got a Honda GX160 engine on it. Fork neck is weak, sprocket is badly worn, seat is frazzled, paint is really bad, front axle spins in axle holes, scrub brake broken off and gone, engine plate welds cracked, no air...

I about never sell anything, but I need the room. Great eye candy and with the 97cc and gear reduction it is safe to ride . . . by anyone. Great fun at parties to let everyone give it a whirl! Complete as shown plus I will throw in an extra brand new motor - $500.00 and no I cannot ship it...

Ready for local pick up. USED Comet 2 speed jackshaft setup. 3/4" bore clutch. Good condition. $100.00 ( Trying to double my money, but don't tell anybody) Pick it up at my 1/22/11 yardsale or ?

Hey everyone, I just recently joined this board and decided to do an introduction. I picked up what I believe are 2 cat mini bikes I am working on. I need to find engines for both but otherwise they are complete. i will try to post pictures when I figure it out. Cheers Diego :scooter:

Cool Site! Some of the old-school mini bikes I've seen on this site bring back a lot of memories! Well, both of my boys, ages 8 & 10 are now getting the need for speed! So, the wife and I were talking the other night, and she had mentioned that her Dad still has there old mini bike in the...

I need a 17 pilot jet for my Mikuni 22mm. I have to turn the idle up alot to start it and it dies sometimes when im decelerating. Needed by saturday or on saturday before the race in perris

I need to get a bike down here from Ashland area. Will pay reasonable freight if anybody wants to make a few bucks. Please PM me with price and date or any ideas. Thanks! KD

j series powell challenger, trade for bearkat or tote gote or somthing just as capable must be running..powell runs good needs minor TlC...or sell for 500.00 firm

I still got stuff........... Three months into the year and I haven't heard anything about this years first Minibike Swapmeet.

forsale Tecumseh 5 horse OHV low hours. has a rub mark on the tank from the minibike frame. $75.00 Socal Chino Ontario