springs

Does anyone know how to disassemble the rear shocks? I need to get the springs off to re-chrome

Got a new Predator, and decided to tear it apart. Its down to the bare block, plugged all of the holes from the governor (2) and oil sensor. Just got a, Isky Black Mamba cam and springs today. Installed the new springs. Waiting on the billet rod, flywheel, Mikuni carb, manifold, jets, and...

I have heard about using the GX200 valve springs along with the stock springs on the GX340/390 and Predator 420cc engines but has any one actually done it? If so how did it work? I have the head off my Predator 420cc and thought about it while the head was off.

In the process of modding up at Predator, just ordered a bunch of parts. Got the motor completely apart, governor out, oil sensor out and flywheel off, head off - all the way down to bare block. Heres the plan: ARC Billet Rod ARC Flywheel BP2 Grind Dyno Cam 18cc Milled Clone Head (going...

Putting a dyno 356 cam in predator hemi and just got through checking piston to valve clearance and came up with .070 on intake valve and .075 on exhaust valve. This is with stock valves and springs and lash caps with zero lash and no head gasket. Is this okay or too little or can i mill head...

I have the 212cc predator clone and recently installed the OldMiniBikes stage 4 hemi on my DB30, the kit doesn't come with upgraded valve springs. It has the mod 2 cam and I can't find any 22 lb springs to turn 7,000 rpms. It is floating the stock valves. Can someone point me in the right direction on...

Right guys Iv been working on a trailer for my Goliath tank. I figured why spend 300$ on a harbor freight trailer when all I really want is the axle and springs. So I scrouged up everything I need for it. I even managed to make an axle so all I had to buy was the springs. I had a long length of...

Hello Taco fans! I acquired a bunch of parts that look like sCRAP, but will eventually become a Taco T100. I have all the important parts. I took the front forks apart and found the springs are welded to the lowers. The welds look factory. The spring is still wound into the fork like they...

Briggs animal springs fit perfectly in the hemi, they are a little shorter than 26lb springs. the exhaust will coil bind with anything more than 275-285 lift. They are a little more heavy duty than the 26lb springs with a touch more pressure. good for the guys looking for 8,000 - 9,000 rpm...

What does switching the clutch springs on the driven pulley do? The stiffer the springs are the higher the rpm range is. But what is it doing differently? Shifting at higher rpms or engaging the drive pulley at a higher rpm? What's the benefit?

Hello, Any one have any springs or know where I can find two or more for an older Horstman Clutch? It has three shoes and three springs. I got it on an old mini bike and two springs were missing. Seems in pretty good shape. I would like to try it. Thanks for any info! chrismh

Where do the springs like the on circled in green go? My recoil came apart and I can't find a diagram that shows where these little things go.

Do the Flexo front springs come out of the forks like the bonanza springs.:out: I know they are a bit rusty and it took me 2 days to get the screw's out. Springs & plugs removable.:out: Thank you.

Bone stock Hemi, Haven't cracked the case open as I'm leaving the governor installed for now. I am however switching valve springs for durability. I have a degree wheel installed for checking timing because I also swapped out the flywheel for a Kohler with a lighting coil. So I was turning the...

My 12 year old is going to start racing karts next year. I know he doesn't need anything wild. I have already taken the governor out so I will be adding a billet flywheel. But what are stuff should I change? I'm thinking springs for sure. I was looking at the stage 1 kit from the OldMiniBikes warehouse...

I am going to take it apart and get the head milled and port the intake and exhaust ports. Then change the cam haven't thought of which cam yet. Gonna also put a billet connecting rod in it and change the springs. Haven't decided what springs yet either. I would like to see if some things for...

Hey, all. I've used the search, would like to know if anybody has a new one, and how do you like them? I've been looking local but the minis are a long drive and seem over priced. so now it's down to looking at kits/ Azusa / El Bandito/ and Lil Indian which has springs Thanks. Mike

WTB Rupp 1968 front forks, Do Not need springs or chrome ends , I just need front end. let me know if you have one?:scooter:

How do you figure spring coil bind on gx390? .307 lift cam 65lbs dual springs 1.200" installed height 1.3.1 roller rockers 6.440 push rod length head mill .100 copper head gasket .21 no lash caps

One of the springs on my clutch broke, I need to find a replacement. Thanks Rob