sprocket

I recently bought a blank sprocket from OldMiniBikes. Had it drilled, but the chain ran from too loose to too tight. I figured the holes were off. I enlarged the holes & made a bit oblong so I could adjust the fit. No matter what I did, the chain stayed too loose or too tight. I finally took the...

WTB three hole mount 2 3/8" center to center- 60 tooth -35 chain rear sprocket for 4" wheel. Any out there?

All parts are plus shipping from 70737 Louisiana , pay pal is best but I'll work with anyone as needed ! DB motor , does run $25 , if you only need parts off it let me know , DB front wheel $15 , DB front axle , nut and spacers,$10 , DB rear 70th sprocket $15 , DB seat cover no tears $8 , 5"...

Horstman split sprocket #35 58T-$5 Rupp forks (uppers)-$35 5" Manco rim set w/ sprocket and brake-$80 4-1/2" brake brand new never used 5/8" bore-$25 4" manco rim w/tire -$30 Sensation rear wheel w/sprocket-$55 Arco ez rider handle bars painted black-$20 Prices not including shipping

RUPP TURBINE WHEELS with Tires, Tubes, Sprocket, Hardware… front wheel Unpainted, chrome great, with vintage 4.00x6 Carlisle … sometimes a 4.00x6 fit where a 4.50x6 doesn't (Continental 250 forks) REAR WHEEL also in great shape (painted, with stainless hardware...

I would like to find a set of 6" series one Go Powers that aren't beat to hell with sprocket and brake, I have a set of nice and clean Lomart 6 spokes I would like to trade, they are in nice and clean shape currently they are raw and very straight. come with an NOS brake and sprocket assy with...

I'm in the process of restoring a Cat 250. I ordered the rear sprocket but its bare metal. Should I paint it? any specific rattle can paint? or different type? Thanks

I'm Mizo, and I'm new to minibikes. I'm 18, and have an eye for anything Gear-Head related, and like to get my hands dirty. I recently purchased a Chinese chopper that I picked up for $60 with a worn out 2-Stroke in it. I decided it was time for it to get a new heart, and went big, with a...

Hopefully this is a simple question. Im 90% finished rebuilding my 130000 series 5hp. I just realized my shaft 3/4" is about 1.25" long. I dont have enough to put a 2 sprocket clutch on it. Will a single sprocket work or do i need a longer crank shaft?

I'm hitting a brick wall trying to find a 24 tooth freewheeling 1st. gear sprocket. For my trail horse comet two speed jack shaft set up. I have the clutch & sprocket but sprocket is missing parts ( barrel bearings & little springs ) Any help would greatly appreciated

I'm trying to find a overrunning sprag clutch sprocket to rework my trail horse jack shaft back to a two speed. I have the original jack shaft clutch & the 24 tooth freewheel sprocket, but the sprocket is missing rollers & springs. If anyone has any ideas were I can find a replacement sprocket...

Hey there, I really enjoy this message board, I have learned so much here. Thank you all for your informative posts and good natured love of MiNis. This is my 1st time selling here. (thanks for your patience in advance:thumbsup:) I'm making room in my shed for new fun. (I'm gonna post a...

I bought this cheap old Yukon Trail Badger mini-bike a couple Christmases ago for my son and have kept it running despite the fact it is really a cheap poorly manufactured mini-bike. I have finally reached the limit of my mechanical ability (which isn't much) with an issue with the chain...

i rescued a minibike from my father in laws back yard yesterday, while looking it over i discovered the jackshaft is seized and while doing some research it seems like my setup isnt that common. ive got a 12 tooth sprocket on the clutch, which runs to a 30 tooth sprocket on the jackshaft, and...

Rupp 6" Rear Wheel Wanted. or the sprocket 1/2

out of stock anybody have one.

Hello to all members. Here is my latest build on my Canadain made "Sprocket" minibike. After viewing and reading over another members gokart build (thanks Russ2251) for some insight and ideas, I just had to do this unique and technical build for myself. As I have read this is not a...

I'm in need of a 9 tooth clutch sprocket preferably for a Hilliard clutch. I need more gear ratio but don't have room for a taller drive gear. I've searched and can't find one. Any help would be appreciated.

With all the issues I have been having trying to get a disc brake installed on the Cat Hillcat, I was thinking about bolting a band drum to one of the sprockets. My question though is what is the depth of a standard 4" bolt on drum like the one from OldMiniBikes? I only have so much room between...

I'm putting together a db30 and decided to crunch some numbers to find what mph my bike should run when complete. I wasn't very pleased to find that it wouldn't crack 30 mph even with the predator swap. So my question is, what should I do to squeeze a few more mph's out of the db. The predator...