straight

  1. noseoil

    Bottom Frame Members, straight line?

    Having trouble at the house with my email server, so I can't load the picture I took, but here's my question. My Baja MB165 frame rails aren't in line across the bottom. If I use a straight edge along the bottom on the motor mount area of the frame, the rear rails where the axle is attached...
  2. T

    Wanted: straight DB30 rear rim and disk

    I may need two so let me know what you have and how much you want for each
  3. K

    WTB Honda gx160 crankshaft, straight.

    Need a Honda gx160 straight shaft crankshaft. Thanks. OEM preferred.
  4. markus

    1968 straight and fairly clean Rupp swing frame wanted

    Trying to help someone out that wants to restore his bike, He has a 1968 TT500, sometime over the years though It apparently needed the frame fixed or something and a 1969 frame was used (all other parts are '68) far as I know the frame interchanged between all models for that year that were...
  5. D

    Straight pipe question

    I have a straight pipe that has a bend in it and I might have to cut it to have it fit on my minibike if I did cut the pipe how will that effect the sound of it and what are some options you would suggest to get it to fit?
  6. Not so mini bike

    Gem straight shot intakes

    One is for a h25/35 engine One is for slant hs40 $60 each shipped
  7. B

    WTB: Bonanza CR 400 Chopper straight front fork. No bends or tweaks

    WTB: Bonanza CR 400 Chopper straight forks. No bends or tweaks. Does not have to have good chrome. Must be straight, Need shipped to NY or will pick up within 100 or so miles. Thanks, Greg
  8. D

    40 dollar 69 ruttman no washer straight bar build

    well ive been making a little progress on my ruttman , i still need to gather a few parts but step one is completed fresh paint , i used two part epoxy for the primer and utec polyurethane for the top coat , i figured blue would look good on it .... before after in the next few...
  9. Fisher1983

    WTB: Older Style Straight Frame DB30 Front Fork

    Hey gang, Looking for a clean, straight front fork for a DB30 (vin LUAH.) Don't care about color though red would be great, mainly concerned about it being straight as possible. Maybe someone who converted to Motovox hydraulic has one?? :) Thanks!!
  10. B

    WANTED: Straight mini bike chopper frame and fork, complete or rolling.

    WANTED: Straight mini bike chopper frame and fork, complete or rolling. Looking for Powerdyne, Stella Blue Blazer or anything similar.
  11. HolyFrijole

    4" Straight Air Filter Cleaner, K&N Style

    4" Straight Air Filter Cleaner, K&N Style with Tecumseh adaptor but you can adapt it to other engines. Hole in adaptor is 1 1/2" center, mounting holes 1 7/8" on center. I adapted one of these to my 79cc engine making a plate to go behind the Tecumseh adapter. $25.00 free shipping to any 48...
  12. R

    Doodlebug Rear Wheel - Straight Frame

    Looking for a straight rear wheel for the db30 straight frame. I think the wheels are different between the 2 models. Mine has a severe wobble to it. Anyone have one they are selling?
  13. Not so mini bike

    Ruttman forks

    Ruttman forks. Straight. $50 plus shipping.
  14. D

    Header for a Boonie

    I see lots of headers made for the flathead. Before I buy one I need to make sure it will fit my boonie. Straight back or curved doesn't matter to me. I must be able to use a RLV muffler though.
  15. Not so mini bike

    Bonanza bc200

    Found this on CL last night and talked to the kid. Was advertised as a frame. Talked to him and turns out he had the original wheels. So picked it up today. It is super straight. No rewelds. Foot pegs aren't bent a bit. Even had the original rear axle.
  16. smallbikes88

    Ruttman minibike

    I was gonna bring this to the ann arbor show but I can not make it this year, so it is available through the site. I can meet if you need, the bike is pretty straight not looking for trades. not sure of the model but its small. If you want to text or call 440-241-3748 greg looking for 500 or...
  17. gumpit

    Bonanza picked up tonight

    Just got back from picking this up. Only about 30 minutes away and the pics are just in the back of the truck on the way home under gas station lights for now. Has a broken footpeg mount. No footpegs. Cracks in the rear fender. Wrong motor. Missing miscellaneous parts like throttle,brake cables...
  18. M

    WTB: Doodlebug (old style forks)

    Looking for old style Doodlebug forks. Can be any color but have to be the straight style ! Thanks in advance, Jeff Illinois
  19. trinik7597

    300x forks

    cat 300x forks no bars spring and new neck bolt included very straight $40 shipped :thumbsup:
  20. Stangrcr1

    Briggs air vane governor

    May seem like a strange request to be looking for a governor, but this is a restoration after all. Briggs 3hp 80302-0016 What I am looking for is part #200 on this diagram: It has the arm coming out at 90 degrees to the vane, straight out towards the carb. The governor I have is for a...
Top