tav

selling the tav off this motor that came with my trail horse.......I have more pics available upon request....please pm me 125.00 shipped with paypal fees included.......it does have a belt that appears to be in decent shape

Here is a easy way to add a jackshaft or Tav Comes with new not shown 5/8 bearings $45 plus shipping

Good Morning OldMiniBikes, I am in the final stages of restoring a Heald Super Bronc that was my Grandpa's Uncle's ice fishing machine. I received this unit in non-functioning condition. The screw that attached the choke butterfly to the shaft let loose, and both the screw and butterfly was taken...

I recently purchased a chinese knockoff Tav 2 for my predator212 mini bike. It was kind of a pain to install( had to raise the motor in the frame to clear the mounting plate and driven pully) but I got it on and working. Now when I roll the bike forward, the friction from the belt on the pullys...

I am getting a predator 301cc (8HP), for my bad dog mini bike build (the big one with the 22 tall x 11 wide tires). I know it's at the upper end of the limit, but I am going to use a comet TAV2 30 series converter for the 1" shaft (218355). My question is: has anyone bolted one of these on...

Hi all, hope this is in the right place. Putting together a Gilson with a Tec HS50 and a TAV setup. Any advice on a guard That would mount on the motor?

I have an N.O.S comet cat 99 tav system, never used but is a bit dirty from decades of sitting..it has a newer style belt... I also have the orig instructions and parts list, a little tattered but legible.. the prices must reflect 70's or early 80's...this would be great for a period correct...

I'am in need of a TAV driven that fits a 3/4 shaft . Can be 6" or 7" . Have cash to buy tell me what ya got .

In shopping for a tav setup for my Gilsons, I see there are 3 different sizes, 20, 30 & 40. What are the differences? I am going to put the driven on the jackshaft, so size is a concern, I think 6" driven pulley is about right. Any help? Thanks, Mark

Like the title says, wanting to get either a jackshaft or TAV for my stepsons stock 97cc new style doodle. Does anyone make either for this bike? We ride our minis at camp that have a few pretty decent hills, and needless to say, he's practically pushing his bike towards the top. I know these...

Ok, I've made up my mind on what minibikes I'm getting my sons for Christmas. I'm picking up one db30 in the morning after work. I have a stock predator in the box to put on it. I'm going to order the engine adapter for it and get the sprocket adapter for it and run a 53t on it with a tav. I...

I'm about to build two minibikes for my 9yo sons for Christmas. I'm going to use azusa frame kits and stock non-hemi predators that I have sitting in the boxes still. I'll probably grab them a header, carb, and filter to start off. I have built one predator with billet parts, ported head, black...

I'm about to build two minibikes for my 9yo sons for Christmas. I'm going to use azusa frame kits and stock non-hemi predators that I have sitting in the boxes still. I'll probably grab them a header, carb, and filter to start off. I have built one predator with billet parts, ported head, black...

What are the pro's and con's of each? I am currently running a tav on my mini, launching with the tav is great but the shifting is killing the top speed. Running only an 1/8 mi. Top speed has been 53mph.

Just wondering if anyone makes a aluminum cover to replace plasic TAV cover?

I need a TAV sprocket for a go kart. must be 40/41 chain. Dont really care how many teeth just needs to be good useable shape. doesnt even have to be new. they are 12 on ebay. hoping someone has a spare they dont need they can let me get cheap. Let me know asap thanks!!!

couple of covers for the Torque a vertor setups. One I can figure out what the bike was but it has info and warning decals on it still that kinda remind me of something Manco would do. $30 shipped (if you know what bike the decaling is from please let me know) The other is way cool as its...

I am looking for a clutch cover bracket for a Wards/Gilson mini bike with the TAV or possibly a template to make my own Thanks JR

I am experiencing a shake, shudder, grinding while accelerating a little heavier from any speed. It feels like the chain is slipping? I have a Brand New Comet TAV and the builder is very experienced. Has anyone had this problem. I have been searching You Tube and found this...it sounds like the...

I have a couple 8 1/4" torque converter drivens for sale. Both are NOS. Not sure of the brand, but the both are cast with "Aslar" on the spring side. These are 7/8" bore, symmetrical and 15/16" belt width (approx.). See photos with measurements. Asking $50 each plus the ride. PayPal...