test

deleted

With my recent foray into the honda ct and z minibike world I thought I would need a test stand for working on my engines. I recently picked up a Baja 90 parts bike , mainly for the engine and after stripping all the parts of it I was left with a bent and twisted junk frame. So I hacked it...

Engine check oil check Methanol check electric kart starter check still need to mount it also need a throttle kit for the Tillotson carb :scared:

Hey guys, I'm another kiwi from Auckland, with another Tru Test. My brother and I had this when we were kids (in the late 80's early 90's) and I've only recently started doing it up. Its in the builds thread now. If you're a Kiwi with a Tru Test, PM me! I need a picture of your brake set up...

Exhaust Test

I did a compression test on my newly purchased $130 1979 Honda z50r and got a reading of 95 psi. Would this be considered slightly on the low side or in the ballpark? I had read somewhere that on most motorcycles a minimum reading of 100 psi is required or don't even waste your time trying to...

2 stroke test fit

Hi everyone, We made a couple changes to OldMiniBikes.com - Replacement Mini Bike, Go-Kart & Small Engine Parts to improve its performance on older browsers. If you have an old version of internet explorer, can you load up the site and tell us if it's fast/faster for you? Thanks in advance.

I believe the video description says it's running on Hydrogen, but will work with gasoline also. Honda_GX390_converted_to_fuel-injected_with_Ecotrons_ALM_wideband-controller.wmv - YouTube

Can someone send me a test PM. I can not tell if my pm's are being sent. Thanks.Dave

test

The topic was brought up recently as to what is the best performing ignition coil. So we put together a write-up on our blog with the data we collected while testing the Genuine Honda, Clone, and Yamakoyo coils when we were developing our S1 and S2 billet aluminum flywheels. Check out the link...

I bought a compression tester yesterday at an auto parts store. The directions say to hook it up and turn the motor over until the gague stops. I did this on several engines I have laying around and got questionable readings. Some were brand new with less than 1hr run time on them and I know...

pretty neat. i fall in the 98 percentile. Test Your Human Thought Patterns - Video

Works with small bearing Briggs 5hp crankshafts. $20 Shipped.

Im so exited i just had to share with my fellow OldMiniBikes friends. Driving test is nov 19th at 2pm. I took driving school and all, but does anybody have some good tips for me thanks alot. :)

This is one of my 2 mini bike projects, both the same.

i just picked up a trail ram mini bike and it has a comet clutch and torque converter i believe the clutch is engaging and working properly but the other day on its maiden voyage the back end locked up what happened is the drive belt over laped itself around the torque conveter. anyone know how...

I see that Ubly has one minibike event scheduled for 8/21/2010. We are interested in going for a test and tune Saturday May 15. This date is not confirmed, so we're just looking for interested parties to respond. I will call the track and confirm that an 1/8 mile test for minibikes is OK based...

Check it Out, and ask questions YouTube - Dyno Testing JD's Minibike