tool

I've had enough of making Z bends with two pairs of needle nose pliers. Can some one recommend a Z bend tool off e-bay that's worth getting ? I've seen about 4 - 5 different ones. Z Bender Tool for making carburetor linkage Thanks, Cory

I have no clue but sure would like to know. Some form of special purpose pliers is all I can add except that they are 6 1/2'' long. Thanks, Doug

I stumbled on to this handy tube coping calculator posted and modified by "Metal Geek." By entering tube OD, wall thickness, adjoining tube diameter, and the desired angle of offset, the program will compute a perfect geometrical shape you can use as a pattern for cutting the coping. You...

I have a few but this is my favorite. My first tool on this list is my SWAG Off Road Band Saw. SWAG V3.0 Portaband Table I cut a block of wood to lock the trigger on and wired it through a momentary contact foot pedal for no hands control. Step on it to cut and walk away when your...

Ironton OHV Horizontal Engine — 208cc, 3/4in. (19.05mm) x 2 19/64in. (58.5mm) Shaft | Ironton Engines| Northern Tool + Equipment Get a $20 off $100 purchase here Save with northern tools coupons from RetailMeNot

Building an HS40 for someone and was documenting as I go along as usual. Never really give Props to some of the tools though and thought I'd show a couple "special service tools" Tecumseh made in action that make life easier and less chance of buggering up seals since the camera was sitting...

3M offers different "Scotchbrite" wheels to fit the bench grinder. Used one years ago. It was long-lasting and did a great a job contouring, edge smoothing, and de-scratching stainless steel in preparation for buffing and polishing. Don't know which one I used, they offer several types, but...

So i know we have all had to change tires over and over again, Some are rather easy and some are a pain, Does anyone have suggestion for tools that make it easier? I was thinking something like this might work good, Has anyone used one? Northern Industrial Portable Mini Tire Changer, Model#...

Hello, I am looking into a laser chain alignment tool. They seem to be kinda pricey for what they are. Does anyone make something that you can just attach a laser pointer to? That would seem to be the cheaper way to go. I don't feel like spending 90 bucks on one of these. For that matter, do...

So we are making some big fiberglass speaker cones for a speaker company and after they come out of the mold they need to be trimmed. I use an air powered die grinder. Due to the fact that I work out of my house I have a small compressor. My buddy says he will bring his brand new Harbor Freight...

How do you remove these freewheel hubs from the rear wheel? I want to get a non spinning hub on here. Seems like it would thread off but then im thinking i need a special tool?

I want to buy a Baja Warrior. I can't find any new ones for sale online. Are they still made/available? Northern Tool and Tractor Supply sold them until fairly recently, but they're not available on their websites now. Where can I get one new? I haven't found any used ones close to me...