torque

I was looking to find a caculator for getting some idea how much more torque a 305cc 10 hp briggs ohv vs a 212cc 6.5 predator..i know there are many factors Horsepower & Torque Calculator - Metaris Hydraulics ...indicates the 10 hp around 15 ftlbs. and the 6.5 hp around 10 ftlbs at 3400...

First off I hope everyone had a safe and happy holiday! I am looking for a torque converter to use on a Predator 420cc 13HP engine. A friend just picked up a Baja Warrior frame that is just a roller. He bought a new 420 today and we have been looking for a torque converter for it. It will be...

hi everyone i owned many minibikes as a kid, i just bought my son a colemanct200u for xmas i also ordered a tav2 torque converter from ebay well i went to install it only to find that the coleman has a 5/8 crankshaft and the torque converter drive pulley is 3/4 so i searched the web only to...

2 belts. For 30 series Tc. Number 203590. Believe I ordered these for a scat kat I had believe it was the old school comet plate tc setup if that helps. I also posted a pic of the belt chart so you can measure. One is. Rand new other has extremely light use on it. Maybe like 30mins to test...

I recently purchased a minibike with a Comet 30 series torque converter. It doesn't look like it is installed right the belt isn't straight between the pulleys. It looks like the Drive clutch is too close to the engine. It there a spacer that goes behind it? Are the fixed sheaves of both...

Looks to be is great shape. Driven has excellent spring back action. Inside of driver isn't all rusty. Can text better pics. Comes with belt that appears to be in great shape. Believe these are rated for up to 8hp engines. Same as comet 340 series $150 plus shipping

Would it be pointless to put a torque converter on a stock predator engine that still has the governor? I'm assuming that it would just get me to the governed speed quicker.

Hi I just joined this forum and got into mini bikes. About a 3 weeks ago i bought my doodlebug. its has been a lot of fun with the stock 6.5 212 on it. But im starting to upgrade it, right now just some basics upgrades like intake, jet and exhaust. I was thinking of get a torque converter...

So on my 72-75 Hustler, it's running the factory TC1 parts on a Honda GC160. Was having issues firstly with something hanging up and clunking on hard throttle at low speed. I lubed up the shaft on the driven and I think it freed it up some and seems to knock out 95% of the clunking. So I was...

How do you tell what series a converter is --20,30 etc ?

When it comes to comet 30 series torque converters mounted on a heavily modified engine, as most know, in stock form they limit the engines rpms. There are several well known ways to make comet torque converters run better but so far there is no magic part that can make one engage at 3000 rpms...

Selling this great go kart setup....40 series Comet torque converter, with an under engine jackshaft mounting plate. 1" bore on the clutch. Shown on a Briggs OHV engine. Engine is NOT included in this price. Asking $150 plus shipping. Or best offer..... Usps postal money order, cash or...

draggin skin clutch 3 sets of brand new springs , new spring holders , new shoes , two drums and 10 sprokets original paper work too everything included $110 shipped

First time I ever bought one of these Torque converters. Question: Is it normal for the edge of the belt to be wearing since it is brand new? I only rode the bike a little bit and its like fuzz coming from the outer edge of the belt. I did notice when I put it together, I thought it was...

I'm thinking about going to check this bike out. The owner says it's a Terra Torque and so does the clutch cover, but every Terra Torque I've seen has rear suspension and this is a rigid frame. take a look and let me know what you think. Is there a different Terra Torque out there other than...

On the original Comet 30 driven unit: As you face the driven from the left side of the bike, with the holes rotated to the top of the driven, what hole is the spring installed from the factory? (left/#1, middle/#2, or right/#3) What is the best position of the spring for off road, hill...

I have a '71 Flying O with an HS40, missing torque convertor and jack shaft. Can someone help me with what OEM would have been? If the OEM is not available what would be a replacement? Thanks in advance

Hi All, I'm very new here as I'm not really involved much with mini bikes but I've found this site pretty helpful so far. My kids have a MMB80 that we just swapped out the stock engine for a Predator 212. The basic job went pretty smooth and the bike is up and running but I have a few...

I was doing a pretrip inspection and noticed something that maybe I hadn't before. I have a little over a quarter inch in and out play in my driven shaft. Is this normal? The bearing spins freely, and there is no side to side movement.