tube

  1. O

    Axle tube/bushings

    Good day all, With a lack of metal shops to purchase from locally I have to order parts required for my build. So what I am in need of is some input as to what size pipe and bushings are needed for the job. I plan on using 5/8" axles and would like to use brass bushings because I would like to...
  2. that_van_guy

    Manco Delta 1 headset bolt woes

    So the Delta 1 chopper I picked up the other day has some serious slop in the headset/fork/steering tube. a 1/2" bolt fits snug in the fork plates, but has play in the tube. It almost seems like it should have a bushing or sleeve between the bolt and the tube, but there isn't one. Did these...
  3. that_van_guy

    Manco Delta 1

    Just scored this bike as a roller from my new friend and semi-local minibike buddy Tiki_Todd. All original except for the front wheel. Working on finding the correct 6" Manco wheel for the front. Someone also cut the foot pegs off. Came with a newer H35 that I will use for now, until I can dig...
  4. Z

    Vintage Carlisle Indian Head 4.10/3.35 - 6" Tire

    Hello, have an old project on hold. Coldest February in Western New York since 1934. This Bird "Duck" Project had a Vintage Carlisle Indian Head 4.10/3.35 - 6" Tire on front. Took the tire off of the front. It had a rubber car style valve stem? And not a tube! Tubeless! The rear had a tube...
  5. outcrydrummer

    project girl tote

    I realized now that my Trisport is taking shape my daughter ( 4 ) is getting a little envious. So I found a bargain on a small trike frame missing the forks and jumped on it. It's gonna be a full out girls ride. Pink and purple....butterflies and all that crap lol. Thinking a small...
  6. T

    WANTED DB 30 rear wheel ,, full set up

    WANTED DB 30 rear wheel full set up rim, sprocket, tire ,tube, all together.
  7. O

    Axle connection to new frame

    Hi everyone, Could use some assistance in tracking down a thread I found that contained an alternate way of connecting a wheel axle to a new frame tube end by using an eye bolt as pictured below. If anyone can recall what thread it was in or possibly where a guy might buy these would be very...
  8. Outlaw Ace

    All American Maverick/ElTigre forks, suspended.

    All American Maverick/El Tigre suspended forks for sale, they are straight and the lowers were removed and re-installed so they work fine. Head tube spacing 6" in case someone is looking to use these on another type bike. Chrome is shot but the forks are quite nice and damn stout. Fender bracket...
  9. 1stlegendtx

    What tube should I order from OldMiniBikes Warehouse ?

    I need a L stem inner tube for a 14x5.5 6 tire. I have asked them twice but have gotten no answer. Maybe they don't have one.:shrug:
  10. D

    custom big tire roller.

    I have a big tire roller I started building but I am not finishing it since I found the Terra floater. The bike in question has new rims, new rear sprocket. 54 tooth 40/41 chain. The hubs and rims are one piece. Has new bearings. New Kenda scorpion 20x7-8 tires. 7/8" chassis tube which I believe...
  11. R

    H35 Intake has small ID??

    I just removed the intake and noticed how small the ID of that was compared to the carb. This pic is of the carb and intake from a H35 but the piece all the way to the left is the end of a pulsa jet carb I cut off. I need to mount this carb to an old Briggs 3hp engine. I can't bolt the h35...
  12. M

    Need Some Help With QA50 Carb

    Hi. New here and may have messed up my first post. I think I attached a photo but not sure. Anyway, I am restoring two '71 QA50's for my kids and have an issue. On the bottom side of the carb there is a tube pressed into the carb body below the float. This may be a vent but could be a plug...
  13. Outlaw Ace

    Heald VT10

    Gone through completely with parts from Ron Kimble, not restored to 100% but it's damn nice. Tank is intact with no leaks, 10hp Tecumseh pull start only but starts easily. New upholstered seat over original foam with new underlayment on an ash plywood base and it's bolstered as the original was...
  14. Bikerscum

    NOS General 4.80/4.00-8 tire & tube

    Another big boy. New, but has some waxy preservative coating that needs washed off. Comes with tube. $60 +$23 shipping 48 states.
  15. Not so mini bike

    6inch 5 star mag wheel with tire and tube

    6" rim with Carlisle 4.10/3.50-6 tube with dill tube. Tire is slightly used with good tread and not cracks. Tube is also used but hold air. Rim is 5 star mag wheel believed to be trail horse. Rim could use a better cleaning. It was painted whit and black I stripped all off and cleaned. Look good...
  16. Not so mini bike

    Nos Carlisle 5" tire and beck tube

    Nos 5" Carlisle 4.10/3.50-5 double Indian head double sided. Never mounted. Beck tube in original box. $60 shipped to lower 48.
  17. Phil1958

    Vacuum Tube Amplifiers

    i like to design and build audio vacuum tube amplifiers. here is my latest creation: this is 5 watt per channel stereo amplifier using 12AX7's as the input stages and 6V6GTA's running class A for outputs. my goal for this design was to be able to run junk chinese tubes and get good power...
  18. gakarl

    Throttle tube and sleeve??? For sales :-)

    So I bought these 7/8th throttle and grips however their the wrong size. Their nice set but too small as I figured out trying to put the left side on. Stupid newb measure mistake on my part. I tore the rubber removing the left grip. But if you put it on some bars I don't think your would notice...
  19. dbadgley

    LiL Indian Fork Tube Spring

    Does anyone know the first year LiL Indian used a fork tube spring?
  20. PAPSTISY

    ? Double down tube frame on ebay

    What is it? I don't believe I ever saw a double down tube like that. Arco? Vintage Old School Minibike Frame Rupp Lil Indian Arco Bonanza Sears | eBay
Top