1. Sixpac440

    Dorothy, Heald VT-7 (anything goes) project ...

    I got a VT-7 to use as a project bike. https://www.oldminibikes.com/forum/mini-bike-discussion/142149-home-heald-vt-7-pics.html Jeep4me christened her "Dorothy" because of the basket ... good working name ... The motor was shot ...
  2. Sixpac440

    So I'm really thinking outside the box for my VT-7 Build ...

    EB Enterprises 121G - Flux Capacitor | O'Reilly Auto Parts
  3. Sixpac440

    This TAV was on my VT-7 ... what is it?

    Its symmetrical ... I expected it to be asymmetrical like the cat99 or 30 series ... It looks like a 20 series (?) .. what did they come with?
  4. Sixpac440

    Just got home with a Heald VT-7 .. Pics ...

    It died on the trail in 2003 and has been sitting in the shed ever since, 14 years. Tires hold air but are weather checked. The gas tank is bone dry. plug was covered with soot. I pull the ripcord and it dosent feel like there is compression .. I don't see any holes in the block. Oil...
  5. Sixpac440

    Heald VT-7, VT-8 or VT-10 roller with the small front wheel

    Looking for a Heald VT-7, VT-8 or VT-10 roller with large rear wheel and the small front wheel from the factory .. I live in Grand Rapids Michigan ... Thanks Kevin
  6. Sixpac440

    Great Looking Heald VT-7 (?)

    Missing the seat cover ... $800 ... Heald Trail Bronc and Mini Motorcycle
  7. Skulls269

    Heald VT-7?

    What is the difference between a VT-7 and a VT-5? Pics would be helpful. Thanks
  8. M

    Heald VT-7 motor replacement

    Have finally given up trying to get an old 7HP tecumseh motor for a VT-7. What should I be looking at for a replacement? Current set up is for a key start with headlight and tail light. I have attached a photo of the bike before I took it apart. I would be interested in tossing a 7hp...
  9. RyanMosley

    Heald vt-7

    I have Heald VT-7 for sale. I do not know the history of the bike. Comes with everything pictured. Tires look new. 5HP Briggs and Stratton motor, turns freely and has compression. Has not been started. Located in Erie, Pennsylvania. Local Pick-up preferred but we can work something out...
  10. pomfish

    Heald VT-7 Handlebars

    Set of bars from Heald Vt-7, one has slight bend near base as seen in picture. $35 Shipped to Continental USA, I ship fast and pack well. Paypal is good, no extra charge. Later, Keith
  11. Iron Honky

    Found a new toy. Vt-7

    Not so mini gave me the heads up on this survivor today. Guy was really cool. Had alot of cool old ford tractors he restored.
  12. pomfish

    Heald VT-7 Butcher Barn Find

    That's right, the Butcher got this one and decided to turn it into a bike big enough for Shaq. Looks to me to be a VT-7 of unknown vintage. Has a Craftsman 6hp big block on it. Good part of the bike is it has a lot of good parts, Front wheel with working Brake, Jackshaft with Driven Torque...
  13. M

    Have vt-7 super bronc engine question

    I have a vt-7 super bronc I have been working on cleaning up. Gas tank rusty, fuel line shot, spark plug wire broken. I am curious if it's worth putting the time in to fix this stuff up and stay original OR I found a 7hp tecumseh engine from a snowblower with electric start that runs for $75...
  14. OND

    Herald Super Bronc VT-7

    Should I buy it ? Vintage Heald Super Bronc VT7 Mini Bike Frame Wheels Assorted Parts
  15. Blackshirt42

    VT-7 99% done

    Sorry, I will get the pictures up soon. I just finished mounting the Predator 420 to the bike, and decided to take it out for a spin around the block:scooter:. Well, it is my first time riding a fat tire mini bike. The steering is going to take a little bit of getting use to. I basically had...
  16. scottneidert

    Super Bronc VT-7

    I am selling my Heald Super Bronc Blue with white motor. Chrome fenders Electric start Working brake light All there Runs great Was restored a few years ago. I have a ski and all original manuals and instructions I am the second owner 1,500.00 obo Located near delphos ohio Local...
  17. Stangrcr1

    Stangrcr1's Open Class VT-7

    What have I gotten myself into.... :hammer: Well here is the pile: I have almost all the parts including the jackshaft bracket. Chatten(Rick) already sent me the clutch and chain guards. I was almost going to go vintage class, but this will not be a full resto. 6hp instead of...
  18. Blackshirt42

    VT-7 wheel bearings

    Hey guys, I was just wondering if any of you with the original super bronc wheels change the bearings. I was sanding down the wheels to paint and I noticed that on of the bearings didn't have the cover on it, and I could see the bearings inside. I believe that the wheels are the original ones...
  19. Stangrcr1

    Switch plate and guards for VT-7

    Looking for a switchplate, clutch and chain guards for a VT-7. Looking for the old style sheetmetal guards. If anyone can give me the dimensions, I can make them. Any help is appreciated.
  20. G

    Vt-7 tire questions

    My newly acquired Heald Super bronc has a a turf tire on the front with square edges. Is this how it is supposed to be? I received the build paper and the picture shows a turf tire. It is kinda hard to turn. It stands up with out using kick stand.