vt-8

  1. Sixpac440

    Heald VT-8 in Hereford AZ ... might be able to get it cheap?

    The guy put it up for sale as a VT-5 .. I contacted him, told him I was a Heald fan and that it was a VT-8, not a 5. He promptly changed the title. Heald Bronc Vt-8 Super Bronc Trail Bronc Original Mini Bike | eBay Fast forward to today. He just contacted me and said: "Well if you want to...
  2. Sixpac440

    Put a starter on a Heald VT-8 ... 5 second video ..

    My daughter has a hard time pull starting her 8hp Tecumseh. I got a 7hp tec with a lighting coil and a starter ring but the bore was shot. I had a 6hp tec, it was a good candidate. I put in a new piston, rings, lapped the valves, ground the head .030, new carb. The lighting coil...
  3. Sixpac440

    Heald VT-7, VT-8 or VT-10 roller with the small front wheel

    Looking for a Heald VT-7, VT-8 or VT-10 roller with large rear wheel and the small front wheel from the factory .. I live in Grand Rapids Michigan ... Thanks Kevin
  4. R

    Super Bronc VT-8 for sale

    I'm selling my Super Bronc VT-8, it's super clean with a new belt and wheel bearing. Trying to make room for some different projects. Asking $950 will help you ship it if needed.
  5. CaptNugget

    Heald Super Bronc VT-8 survivor for sale

    I have a Heald Super Bronc VT-8 survivor for sale It needs restored but is complete and all original It has the original key, windshield, speedo, horn, controls, seat, etc I also have a new repop kickstand and rear hitch bracket, and a blown up 24x36 exploded view diagram I'm ONLY trying...
  6. CaptNugget

    Heald Super Bronc VT-8 survivor for sale

    I have a Heald Super Bronc VT-8 survivor for sale It needs restored but is complete and all original It has the original key, windshield, speedo, horn, controls, seat, etc I also have a new repop kickstand and rear hitch bracket, and a blown up 24x36 exploded view diagram I'm ONLY trying...
  7. Sixpac440

    Heald VT-10 vs VT-8 ... work and play .. 4 pics ...

    A tornado went through one of our riding spots and knocked down a few trees ... We brought out the Heathkit Hilltopper twins, The VT-8 ... back tire pressure was 10 lbs, front was 20 lbs. .. and the VT-1012 .. tire pressure was set to 10 lbs .. With the Chainsaw...
  8. RobertC

    Craigslist Charlotte NC has PA listing of Super Bronc vt-8 plus vintage motorcycles

    Craigslist Charlotte NC has PA listing of fully equipped Super Bronc vt-8 plus vintage motorcycles: https://charlotte.craigslist.org/mcy/5765385816.html
  9. Super Bronc vt-8

    Super Bronc vt-8

  10. creia

    Heald Super Bronc VT-8 torque converter question

    On the original Comet 30 driven unit: As you face the driven from the left side of the bike, with the holes rotated to the top of the driven, what hole is the spring installed from the factory? (left/#1, middle/#2, or right/#3) What is the best position of the spring for off road, hill...
  11. Sixpac440

    Heald VT-8 Spark plug?

    The one that's in there says MM1 on it .. looks like a champion base. I can get my plug socket on it fine. I tried a taller J8C (Champion) and its too tall to get the plug socket on. What is the plug that belongs there? Thanks Kevin
  12. Sixpac440

    Picked up A Heald VT-8 Today ....

    Got this for my 32 year old daughter ... the sellers father bought it new, it sat in a barn for 20 plus years ... the seller rode it as a kid and inherited it 2 years ago when his father passed away. I will get the correct back tire on it, clean it up, go through the mechanicals but keep it...
  13. heavygs

    Super Bronc VT-8, Just For Fun

    I'll join this party, might get motivated to finish this thing, Picked up this Bronc awhile back, got it tore apart, found a motor for it and started collecting parts, then kind of stalled out. I'm on the road right now so I'll post my official pic later this week, plus I have to find a coffee...
  14. P

    Super Bronc VT-8 Torque Converter

    Hi guys. I've been down a while and just got back to a project. http://www.oldminibikes.com/forum/what-is-it-/98483-what-is-it.html Long story short I have ordered the wrong drive member. Can anyone verify the correct comet series for this? I've been searching this site and think it's a 20...
  15. butch63

    new rear tire for my super bronc vt-8

    chatten63 {vt guru} turned me on to a tire site, atvtire.com. found a duro 21x12x8. $ 61.00 shipped to my door. thanks Rick:thumbsup:
  16. P

    My Super Bronc Story/ What to do

    Good Evening All, I am Josh. And this little lady is my 76' Super Bronc VT-8 and her story: One fall evening my grandpas uncle thought it might be nice to have a machine
  17. CaptNugget

    Heald Super Bronc VT-8 BARN FIND SURVIVOR all orig

    Found me a Heald Super Bronc VT-8 in a small barn. It's pretty much all original. Not running but look 90%+ there. I got it originally to flip but I think It's probably goin to end up in my collection (even tho it's all trikes). It's just too cool and so complete, it even came with a windshield...
  18. diggers

    picked up a heald super bronc is it a vt10 or vt-8

    Hello picked up this super bronc with tecumseh 10hp electric start with snow ski from a guy that had it sitting in his shed for 8yrs. He bought it as a project its missing the intake,carb and cleaner also the primary clutch and belt so I'll be in need of those parts to get this thing running...
  19. owend

    VT-8 fork spring

    I am working on a Super Bronc VT-8 for a friend of mine and need one front fork spring. It can be new or used as long as it's not broken or bent out of shape. Thanks, Owen
  20. RobertC

    Exhausted my knowledge....Super Bronc vt-8 is now at small engine repair shop !

    Hello Everyone, Well, I gave it my best shot...I had lot's of help from folks here on the OldMiniBikes, and I thank you very much for all the help..:thumbsup:.... and although I'd vowed to make this thing run without taking it to the small engine repair shop...:laugh:....after my installing new...
Top