wheel

  1. OND

    DB Wheel and Tire

    If anybody is looking for a DB wheel, tire, sprocket and rotor...here's a cheap one ! Not mine. Doodlebug DB30 rear wheel and tire assembly | eBay
  2. J

    Bad Dog Gigantic Frame - Wheel Spacer(s)

    Hey All, We are working on our Bad Dog Gigantic project. The kit shipped with a spacer, which is about a 14" piece of steel pipe to be used to space the wheels to be center. However, we are unsure what size to cut these spacers to. BD just shipped a piece of pipe and we are supposed to...
  3. diggers

    What to do with aluminum wheel with bad bearing hole???

    I got a sleight problem on a aluminum rim. Not sure if anybody else ran across this problem but the wheel bearing just slides in instead of tapping it in. I'm sure if I run it the way it is it will just whop out the hole more making it junk in the long run. Any kind of suggestions to do or what...
  4. Fantic Freddy

    Sprocket for a 6" Manco wheel

    I'm in need of a good used 60 tooth 6 hole sprocket for a 6" Manco wheel. Nothing pretty, as long as it's straight. I have the adapter. Using a 35 chain.
  5. V

    want to buy manco wheel sprocket spacers

    wanted manco wheel sprocket spacers need a few of em. 6 bolt pattern.
  6. Not so mini bike

    4" lil Indian mag wheel

    Great shape. Original hardware. Will include 2 new bearings $75 shipped
  7. Not so mini bike

    Rupp turbine wheel sprocket help

    I was wondering if anyone had the measurements of spacing from lug to lug on the sprocket for this wheel. I was wondering if I could use this sprocket on a ruttman 5 star mag.
  8. B

    WANTED: George Barris correct spoke wheel for LowRider chopper. Other Barris? TOP$$$$

    WANTED: George Barris correct spoke wheel for LowRider chopper. Other Barris? TOP$$$$. Looking to purchase the correct 28 spoke 16" front rim for a George Barris Low Rider mini bike. Must be in nice condition. No rust or bends please. (Iverson bicycle) Other Barris bikes and parts? We will...
  9. H

    6" Gilson wheel

    WTB one 6"gilson front wheel axle and spacers for a 525 let me know what you have
  10. C

    manco 6" wheel

    I'm looking for a 6" manco cast wheel, Thanks everyone:smile:
  11. H

    Wheel Truing Stand (from old parts)

    Several times, I have removed the spokes from a 10" wheel, repaired or had the wheel chromed, then laced the spokes, and trued the wheel on an old axle stuck into a vice with a sharpie marker for indexing. On this latest 10" wheel for a Cat "Wildcat," I just could not get rid of the wobble...
  12. Fantic Freddy

    Pinto front wheel and tire

    I could use a usable front wheel and tire for an early 70's Golden Pinto.( 6" ) A front and rear axle too. (the tri star wheel preferably) I need the spacers also. (I need so much sh*t for this project it's not funny)
  13. Stitch

    WTB Original DB30 rear wheel / front wheel

    Hi, I picked up a project DB 30 for $35.00 and was going to use it for parts. After a closer inspection, I decided that I would like to rebuild it. I need the rear and front wheels hopefully with spacers but not necessary. I have pretty much everything else needed. Thanks guys!
  14. Taco Loco Joe

    Unknown Wheel

    This wheel came on my Micro Cycle. They only came with Go Powers. Look Familiar?
  15. Sixpac440

    Thug life on the back wheel ...

    https://www.facebook.com/757681627584891/videos/1320953334591048/
  16. Daniel Coop

    Need help with wheel choices and sprocket count for Trailhorse GT800

    I need help deciding what 6" wheel and sprocket count I should use for upsizing from my 4" steelies. I'm considering the Astro's but don't know how wide I should go and weather I should use a 60t sprocket or a 72. The original jackshaft is still on the bike and it's got a Raptor 3 with a 16t...
  17. gumpit

    Manco 4" wheel spacer/sprocket question.

    Do the 4" wheels use a spacer similar to the 5" and 6" ones for the sprocket? Or just stand offs? Does anyone have a spacer for a 4" wheel or know the length of the spacer? Does anyone have a sprocket for a 4" wheel or know where to get one?
  18. jeep4me

    Lil' Indian 4" Steel Wheel set W/sprocket and One Tire

    Pulled this set of 4" wheels off from a Lil' Indian frame a while back. Thought I might be able to use them at some point, but I'd rather have the dough instead. Front wheel still has the original DIH Carlisle tire on it, in decent condition. This is the wide tire. Looking to get $80 plus...
  19. L

    Lil Indian Mag wheel rims 4' - 6' sets

    Lil Indian Mag wheel rims. 1 set early take offs 4' mag wheel rims with original general tires. 1 tire is good the other has a crack. 1 set NOS 6' mag wheel rims with original bolts. Would like to sell as a package $500.00 248-628-0261
  20. R

    Wheel question

    I have what I believe to be a Carter Super Wheel 2 seater kart. I am working on getting it put together for my daughter for Christmas. I was measuring the rear axle and it appears to be a keyed 5/8" shaft. I have been looking around and for the life of me cannot find wheels with a keyed 5/8...
Top