12" axle

[Big Jim]

I need an axle for the front of my Trail Ram. It had a bolt in it originally.
The axle needs to be 12" long, 5/8" diameter with 1" of treads cut on each end. 18 tpi.
All of the "stores" cutoff at 10"
Can some one machine this for me???

 

[1BadFox]

I need an axle for the front of my Trail Ram. It had a bolt in it originally.
The axle needs to be 12" long, 5/8" diameter with 1" of treads cut on each end. 18 tpi.
All of the "stores" cutoff at 10"
Can some one machine this for me???

I have found one at granger outdoors.. I dont know if you have one of those nearby. It was a bolt though.

 

[Big Jim]

Found this, it's aluminum....... Not sure if it is going to hold up?
Any ideas?

Dbl End Thd Stud, 5/8-18, Alum - Double End Threaded Studs - Bolts - 2DLV7 : Grainger Industrial Supply

 

[Bill Ellerby]

Check out item 1DV47 at graingers, its steel. Good Luck

 

[Big Jim]

Thanks for the help!
I found a bolt that should work.... If not I guess I'll spend $20 at Grainger.