5.5hp ohh crankshaft question.

delray

Well-Known Member
#2
yes and no. not sure if the area where the plastic cam lobe for the points is the same and i believe the tapper for the flywheel is different and the threads too. but it will fit in the block.
i believe markus can chim in.......
 

markus

Well-Known Member
#3
There is the taper issue like delray said (that can be overcome by using a flywheel from the early-mid 1980's), but I dont think they ever crossed with the HS50 engines, some H35/HS40 (late model) do but not the HS50 that I have seen. HS50 have more material on the counterwieghts.
 
Top