A few ponies

[Powerband83]

A customer wants something with some spice over in AZ, so this is the start. My billet side cover inventory is low, but want to make sure he has the option to run the motor apon arrival. He has plans to buy a billet cover at his convenience. Last night I finished up the 1.375" intake valve/seat. Ex side is already at 1.160"(not titanium). After work I will ultrasonic, check pop off, adjust fulcrum height, new diaphram, new inlet cover, and new strainer screen.
He should be very pleased

 

[superflea]

2 plug wires?

 

[sparkwizard]

After seeing the plug wires, I looked for the head. I can see one plug hole. Is there another one?

 

[Powerband83]

It's a dual plug cast head from Otis.
Mostly for looks. Been tested by many and don't show significant gains on any dynos.

 

[superflea]

you could put a compression release in the second hole.

 

[Powerband83]

This will be built per customer needs/wants. A remote Burris starter box will have no issue's getting it to turn over.

 

[massacre]

Love this! Thanks for posting!