I have a Trisport that came with a Horstman torque converter. I am unsure of the model the trike is, but I know it is a TS series thanks to this site. Does anybody know what the specs are for belt and center distance? I guess most important is belt width as I can figure out center distance. Is there a way to measure the sheaves and find out the proper belt width?
Alsport Trisport Belt Question
The proper belt width should be 5/8 of an inch. With your engine being adjustable in the base slots And if your Horstman driver is the normal 6 inch in diameter I would set up the engine in the center of the adjustment slots and measure the center to center distance between the two shafts and then the chart I would use is the Comet 20 series charts. Then the next issue is to start looking for a replacement belt.
Steve
Steve