I bought a mini racer, fixed it up, it was losing compression around the spark plug threads, so i ordered a honda g100 head, and new piston rings for good measure.
So I installed the new piston rings and new head, I'm pretty darn sure I put everything back together right. Valves are opening at the correct points in the cycle.
But it won't start now. I cleaned and re assembled the carb. I'm beginning to think I just don't have proper compression.
Is there something I can mess up re installing the piston rings? I clocked the rings, and when I put the gear that moves the valves back in i aligned the two dots. I feel like I'm missing something.
I think I'm gonna take it apart and put it back together again.
So I installed the new piston rings and new head, I'm pretty darn sure I put everything back together right. Valves are opening at the correct points in the cycle.
But it won't start now. I cleaned and re assembled the carb. I'm beginning to think I just don't have proper compression.
Is there something I can mess up re installing the piston rings? I clocked the rings, and when I put the gear that moves the valves back in i aligned the two dots. I feel like I'm missing something.
I think I'm gonna take it apart and put it back together again.