Baja Warrior(?) 196cc Stock Throttle Assembly Setup

#21
Thanks for all the replies and assistance. I got it up and running finally, with the big breakthrough being from @desert rat 's tip about the governor and how it works. I linked the medium spring up to the governor arm, and back to the throttle assembly arm, not just to the base of it. Had to play around a little with what slot I had it in. First setup was too far on the spring, so it ran the second I took off the choke. Next setup seemed like more of the same, but after giving it throttle real fast and letting off, it seemed to work just fine afterwards. I'll lubricate some things, and make sure none of the springs are snagging on anything, but I consider that a success. Next thing to deal with is welding the left peg back on, getting a replacement gasket for the gas tank fill port, and finding/fabricating some type of cover over the chains.

PS: governor is there and works as it should.
Can you post pics of your final throttle setup?
 
Top