Bearkat

capguncowboy

Well-Known Member
#7
Any ideas on pulling the front fork off to try and straighten
I had an earlier model BearKat a few years ago and for the life of me (and my pneumatic impact gun), couldn't get the fork bolt out. I gave up and donated the project to someone else (it was beyond my scope of work anyway). You may have to cut it and hammer it out
 
#10
So there is a Allen head plug bolt at the top collar that I removed... and started the collar moving down the fork tube.... it is moving... but then I stopped and thought maybe I’d better ask someone who may have done this already so I’m not doing damage...
 
Top