Bonanza MB1150TC

#1
I bought this 3 years ago. My thread, Truck load of mini bikes!!!! tells the story on how I found it. I got it running recently and she runs Great! I always liked the look of the Mickey Thompson Bikes so I swapped the stock bars for some 18” Apes and Beston grips. It’s got a seat off a BC1500SH. The Bike has a Hortsman Torque Converter. I know nothing about these TCs. Does anything need to be lubed or adjusted? It takes off smoothly. Does anyone know where I can buy a new belt? Thanks Joe EC614689-49C7-4FE2-A2CC-83A948726456.jpeg 524D76DD-5C22-42A7-BB92-F0DF014FD0DD.jpeg FA2C2407-878D-4524-AB09-F4706EC86E89.jpeg E8177546-FE98-4077-B0AC-2C8C09AF5F29.jpeg C3211C06-BC94-4842-89EB-2575F7E5322B.jpeg EC614689-49C7-4FE2-A2CC-83A948726456.jpeg 524D76DD-5C22-42A7-BB92-F0DF014FD0DD.jpeg E8177546-FE98-4077-B0AC-2C8C09AF5F29.jpeg FA2C2407-878D-4524-AB09-F4706EC86E89.jpeg C3211C06-BC94-4842-89EB-2575F7E5322B.jpeg
 
Last edited:
#3
Congratulations on getting it going Joe.

Makes for a cool looking rider.
Thank You Robert. I had to swap the metal tank full of holes for a plastic one, exchange the leaky, corroded Flojet carb for a Chinese Tec Carb off my pals rototiller. I suspect the bikes been sitting for a long time because the brake arm was frozen. The pull rope squealed and wouldn’t retract. After I cleaned the pull start clutch and sprayed the ball bearings with graphite, it worked fine. It’s just a low dollar rider .
 
#7
Thanks for the info Dave. I just added a Chrome pipe right outta my 1968 Childhood days. Back then, I cut a section from my Moms old Chrome ironing board leg. I took it to the kid who was already welding at 12. You know the kid whose Dad was a Machinist LoL. I got a Tattoo Artist up the street who’s gonna lay a little Pin Striping on the Fender. I got a $5000 Bonanza/Hodaka indoor Queen collecting dust. This ones more Fun! E9625F52-698B-4665-BF11-A3A245692324.jpeg 5E3D8F60-7847-4DBD-8B8F-88CE570A9619.jpeg D6CE431D-062E-41AC-A5DE-251819F30929.jpeg
 
#16
I swapped out the front mounted tank today for a cylindrical tank because I wasn’t getting enough gas flow. It looks better too. Next I wet sanded the Chrome Bars, lever and mirror with 220,320 to give it a satin nickel finish. The Bonanza BC 1500 seat wasn’t “ratty” enough so That got switched. I removed the chipping black paint off the lower legs. It’s a blast building a Rat Bike. Not sweating everything being Correct lol. 9DB44B84-5BD6-48B0-AD1A-029A8438FE9D.jpeg 4A6195EA-6A9E-45A0-B769-3DD6AFCE785A.jpeg
 
Top