I bought this engine brand new last month, and built it for a race kart, and now we're going a different route. Has only ran about 3 minutes total on the bench. Has never had a load on it. Have all receipts.
-genuine Honda gx200
-head ported and decked
-26lb valve springs
-flat top piston
-OEM Honda cam welded and reground .040 larger by Oregon Cam Grinders
-valves lapped
-valve stem seal removed
-balanced crank
-governor assembly completely removed
-arc stepped header
-arc velocity stack filter adapter
-92 main jet
-140 e-tube
-air screw replaced with adjustable one
-timing advanced 6 degrees
-arc flywheel cover
-Also comes with a Digatron tach & temp gauge out of one of my karts
I have all the original parts as well, and will go with the motor.
$300
I have pictures, but posting from my tablet, and I can't seem to upload them properly. I can email photos.
-genuine Honda gx200
-head ported and decked
-26lb valve springs
-flat top piston
-OEM Honda cam welded and reground .040 larger by Oregon Cam Grinders
-valves lapped
-valve stem seal removed
-balanced crank
-governor assembly completely removed
-arc stepped header
-arc velocity stack filter adapter
-92 main jet
-140 e-tube
-air screw replaced with adjustable one
-timing advanced 6 degrees
-arc flywheel cover
-Also comes with a Digatron tach & temp gauge out of one of my karts
I have all the original parts as well, and will go with the motor.
$300
I have pictures, but posting from my tablet, and I can't seem to upload them properly. I can email photos.
Last edited: