Briggs & Stratton Engine Help

[Danielson]

Hi everyone,

My friend Scottessey hooked me up with a Cal Kart Invader frame and a Briggs & Stratton 4 cycle 5 HP I/C series engine.

I was wondering if anyone could refer me to a rebuild kit for the engine and or any other components i may need to get started up.

This is my first minibike build.

Thanks

https://www.flickr.com/photos/65622581@N06/14469261702/in/photostream/

 

[Scottessey]

Cool! You made it! :thumbsup: Fellas, this is my friend Daniel. He just graduated high school.

Daniel, post up the stamped numbers from your Briggs and we'll see if someone can help lead us to the right carb kit for it. Then, I'll help you get it running.

Also, hoping someone here will have a lower profile air cleaner you can pick up. :thumbsup:

By the way... Post up a pic of your '54 Ford truck. I'm sure there are some folks that would like to see it. :thumbsup:

 

[Danielson]

Its a Briggs and Stratton i/c. The engine model is 131232, the type is 2036 01, and the code is 81110407. I found a few things on wikipedia and its a horizontal shaft made from 1979-1985. I also found a parts list

I found a couple things that might work for this.
Gasket Set Briggs Stratton 100200 130200 131200 132200 5HP Engines 495603 | eBay

4 0 5 5 6 5 HP Baron Tools Engine Side Shaft Go Cart Kart Clutch Free Shipping | eBay

Here's my other project ive been working on as well :smile:

 

[bikebudy]

WELCOME ! Both should be sweet when done.

Did you get your High Speed fork worked out?

 

[Danielson]

@ bikebuddy , the forks were bent, I have yet to do anything besides sandblast them a bit. However I think the plan is to replace the lower part of the tubes