Button killswitch installation on a 79cc Predator engine

[theguy1991]

I've got this killswitch https://www.OldMiniBikes.com/Kill-Button-Switch.html?category_id=15#product-details-tab-description

Do I just attach the metal part to the bolt that the "OFF" wire runs to and that's it? I don't want to mess up the "ON" "OFF" switch already on the engine.

 

[Harleys Papa]

Nope splice it into the other wire, the one with the plug :thumbsup:

 

[Inventorpardue]

Nope splice it into the other wire, the one with the plug :thumbsup:

x2 :thumbsup:

 

[theguy1991]

So I splice it into the green plug wire and attach the metal bit at the end to the "off" bolt?

 

[ole4]

No when you push the red button it grounds the wire to the handlebars the ground travels down the wire to be attached to where the green plug in is coming from the on off switch so that when you want to kill the engine you press the button and ground out the ignition, The wire where the green plug is is from the ignition, It goes to ground to stop the engine, Does that make sense?

 

[theguy1991]

Ah yes I see now. Thanks!