carb linkage

#1
My DB30 has been sitting for a while, took carb apart cleaned it all out and have it running ok. Was not able to road test because throttle cable was seized (new part on the way) but in the meantime, my linkage springs are now stretched, bent and likely not in the correct places. Anyone have a good picture or diagram of how the springs should be positioned? Thanks.
 
#4
Hey! Where did you buy your replacement throttle cable from and do you have apart number? I'm in a similar situation and cannot find the correct cable. Everything I've looked it either doesn't measure up or has the wrong ends. Thank you.
 
#7
Last edited:
Top