Clinton 501 Oil Seal Help Request

[cl350rr]

I am trying to source a PTO side oil seal for a Clinton 501 2-stroke, Clinton part number 94-172, old number 4429.

Any help finding one or cross referencing to a modern equivalent would be greatly appreciated.

 

[sparkwizard]

Let me look tomorrow. I have some packages and some seals that did not get put back together.
Does the seal look like the one in your E65? I think I have a D35 seal.

 

[cl350rr]

Thanks for checking but it is quite a bit smaller than the E65 seal. I got the old seal out and measured, it is a standard .875 X 1.375 x 1/4" seal, the one in there was a double lip but a single should work fine.

National 471267
TCM 08132tc-BX
Chicago Rawhide 8648
Polaris 3610037
Ariens 05600001

 

[sparkwizard]

That is larger than any of my stash of Panther seals, too.
A National number should be good at most auto parts stores.

 

[cl350rr]

Got a pack of 3 coming from Flea-Bay for about the price of one through the auto parts

 

[cl350rr]

For future reference, the magneto side seal is National 254270,

Shaft Diameter 0.750"
Outer Diameter 1.129"
Overall Width 0.188"

Apparently also: PAI GOS-6182 Shifter Oil Seal for Mack TRL-107 Trans 88AX370P3