Hey guys. I’m putting a 200ex back together. Looking at the parts diagram it shows on the triple tree a washer on top and a washer on the bottom. No washers in between, just the frame tube with the bearings and bolt.
I put it together like that. (I also found a small washer when I took it apart “between” the triple tree which wasn’t in diagram)
Anyway, there is a big gap at the bottom...or the top if I lift up. Is this intentional? Nothing is bent or messed up, it just seems odd to me. I am attaching pics of how I have the 2 washers and the gap I’m talking about. Any help is appreciated.
Thanks,
Mike
I put it together like that. (I also found a small washer when I took it apart “between” the triple tree which wasn’t in diagram)
Anyway, there is a big gap at the bottom...or the top if I lift up. Is this intentional? Nothing is bent or messed up, it just seems odd to me. I am attaching pics of how I have the 2 washers and the gap I’m talking about. Any help is appreciated.
Thanks,
Mike
Attachments
-
706.4 KB Views: 14
-
698.4 KB Views: 12
-
1.9 MB Views: 13
-
1 MB Views: 15
-
1.3 MB Views: 18