Coleman CT200U-EX

Cuh

New Member
#1
I added Torque Convertor Kit and Stage 1 Kit and it doesn’t start now. I don’t know where I went wrong? I added a bigger jet and a new Carb?
 

Cuh

New Member
#2
It starts up but then turns off, If I hold the gas it’ll stay on and sound really choppy while the choke is on. If I switch choke off it dies.
 

toomanytoys

Well-Known Member
#3
Check your throttle linkages. Did you get the carb gaskets in right? When you put the new jet in did you knock the emulsion tube out?

Sounds to me like you have an air leak around the carb.
 

Cuh

New Member
#5
Check your throttle linkages. Did you get the carb gaskets in right? When you put the new jet in did you knock the emulsion tube out?

Sounds to me like you have an air leak around the carb.
Ok new issue. It stays on now. But when I switch the choke off and give it gas it doesn’t want to go. It on goes when the choke is on. It also goes forward when the choke is on as if I’m giving it gas.
 
Top