Crankshaft bearing

[Jevincj]

Going through parts look up shows a bushing on side cover side I have a 26-52-15 bearing. Any better place to source than amazon for 50$?

 

[Havasu Dave]

It's a standard 6205 bearing.

Do a Google Search. There is one on Ebay for $1.50. Median price seems to be less than ten bucks, but you have to watch quality. Also, when you get one, usually made in China, carefully pick the seal out with razor blade or dental pick and add some grease to it.

http://rover.ebay.com/rover/1/711-5...0001&campid=5335845805&icep_item=124081318215

http://rover.ebay.com/rover/1/711-5...0001&campid=5335845805&icep_item=352148992872

 

[Jevincj]

Nope. Mine has a 26mm I.D. 6205 is 25mm. Thanks though

 

[Jevincj]

6205/36 is the correct size and half the price

 

[Havasu Dave]

I'm sorry for not noticing the "26". Generally I rebuild Tecumseh engines with bearings that are in SAE sizes, so I assumed you were working on a standard Tecumseh with it's one inch diameter. For those flathead Tecumseh's, it is a 6205.

 

[Jevincj]

No problem. Thanks again for the information anyway

 

[ole4]

When did they use metric sizes?

 

[Jevincj]

When did they use metric sizes?

Not sure this one I believe is from the late 80’s or 90’s. It’s the hh70 I’m putting the connecting rod in I bought from you.

 

[Havasu Dave]

I have two new bearings that I ordered for a Tecumseh project long ago. I am out of the pull start game, so I don't need to store these. You can have them for $10 each, plus shipping USPS.

 

[Jevincj]

Thanks. Mine measures 26-52-15. Bearing warehouse locally ordered it for 25$. I appreciate the heads up though