Doodlebug track build

I

iStone

New Member
#21
#21
Yeah, I wasn't really looking to get those until this winter when I rebuild it with a different head and everything. I think I can make these work if I just push a screwdriver through the holes to open them up. I didn't know these 3/16th rods were thicker than the stock ones.
 
I

iStone

New Member
#22
#22
Well I mounted up the PMR wheelset with the OldMiniBikes sprocket adapter this morning. This is how it will ride if I don't get to the front brake adapter in time.

 
I

iStone

New Member
#23
#23
Here is everything sitting in there for a test fit. It's starting to look like a real bike! Going to drill the holes for the mounting plate then try and start it for the first time. Fingers crossed :drinkup:





 
I

iStone

New Member
#25
#25
Here is the current build list for those interested.

Baja Doodlebug:
Predator 212cc 6.5hp
PMR Engine Plate
ARC Billet Rod (.020 longer)
ARC Billet Flywheel (4* timing key)
Mod2 Cam
19mm Carb (GX140 E-Tube, #36 Jet)
Straight Pipe Exhaust
RLV Muffler
18lb Springs
Chrome Moly Pushrods
Governor Removal
ARC Top Plate
Walbro Fuel Pump
PMR Remote Fuel Tank Kit
PMR Wheelset
Hydraulic Brake
OldMiniBikes Split Sprocket Adapter (60T Sprocket)
 
I

iStone

New Member
#28
#28
Threw it in a red frame since I was working on the green one. Did a short little fly by. Top speed with GPS was 54.8mph! This thing is a blast.

[YOUTUBE]ML5n2DVhg7M[/YOUTUBE]

[YOUTUBE]W74trjpkPd8[/YOUTUBE]

Sorry about the vertical video. I wasn't filming...
 
Last edited:
You must log in or register to reply here.
Top