Ell burro

[thejoker]

So I just got this the other day. Dose anyone know where I can find some of the parts? What they will cost?

 

[capguncowboy]

The clutch guard will be easy to find. Hard to hide something that big :laugh:

It's pretty awesome Joe. I like it!

 

[minikenny]

The missing parts can be yours for one MEELYON dollars!

Cool bike! :thumbsup:

 

[ZR9B]

Those are sweet bikes...hope to see the end results

 

[thejoker]

Thanks guys. Also I don't see any valve stems. I really didn't look too hard. Are they tube tires?

 

[capguncowboy]

Oh yeah, I remember these. the tire/wheel is all one piece, right?

 

[manchester1]

I make the seats for those bikes. Get your wallet out.:laugh:

 

[manchester1]

 

[cheezy1]

The wheels/tires are unobtanium....

 

[thejoker]

Lol I'm not that far yet. Still trying to find out what the parts will cost. If it's even worth it to me.

 

[yankee-bears]

The valve stems are on the inside of the hub leaning against the axle . Not easy to put air in the tires , and even harder to keep the air in most of them . You will probably be making axles and looking for 21-12-8 tires with a 4 lug 4 inch bolt pattern . Been there done that . If you go looking for replacements , remember they are directional .

 

[thejoker]

The valve stems are on the inside of the hub leaning against the axle . Not easy to put air in the tires , and even harder to keep the air in most of them . You will probably be making axles and looking for 21-12-8 tires with a 4 lug 4 inch bolt pattern . Been there done that . If you go looking for replacements , remember they are directional .

Thanks for your help.

 

[thejoker]

The valve stems are on the inside of the hub leaning against the axle . Not easy to put air in the tires , and even harder to keep the air in most of them . You will probably be making axles and looking for 21-12-8 tires with a 4 lug 4 inch bolt pattern . Been there done that . If you go looking for replacements , remember they are directional .

Thanks for your help.

 

[ZR9B]

I made a set of the bearing keepers for the rear...let me know if you get that far

 

[thejoker]

I made a set of the bearing keepers for the rear...let me know if you get that far

Thanks I'll let you know.

 

[Sport King Eric]

You can make the Jackshaft sprocket out of parts from granger.. did a couple the hard part is finding the torque converter plate with the disc brake

 

[thejoker]

Do you have any pictures of the set up?