Eshelman tiller aerial truck build

#1
Hey everyone, our Eshelman funny car is done, complete with lights, siren and bell.
Now for the tiller-steer trailer... The following list is a best first guess...
14 foot long, the two main beams are 2”x3”x 0.065” (16 ga) steel.
Clown Tillerman at the rear seat with steering.
8 foot fixed ladder, able to set up and climb a few steps and wave an American flag.
Stabilizers that are 3 feet long each, plus a tongue jack pad.
Rear brakes on each wheel, rotors with solenoid calipers, when the driver applies the brakes, all six wheels brake at the same time.
Lights, buzzer intercom, electric brakes and a bell on the trailer.
As light as possible.
12-15” tires.
Powdercoat red to match the Eshelman tractor.
I’ll work on pictures, I promise. I have an Eshelman ride video in my photos, working on a way to post it.
Steve
Rear steering is my first hurdle to jump.
 
#2
Got the trailer roughed-out. We’ve got a high backed bucket seat for the tiller ride position. I have to add a hitch and jackshaft to the Eshelman yet to get it geared down to 6:1 or so. The tillerman ride position will have a right foot band brake and a left foot buzzer for the comm. 213EAACA-46A3-4951-80D2-3B97198C21A9.png FEAB00FF-1B93-4AC1-9D9F-6C07AB0203CA.png
 
Top