Fitting a billet rod in a hs40

ELT

Active Member
#1
I see there is a clearance problem with the oil dipper and the camshaft. I'm looking for input on addressing the problems. I've found some mention of removing material from the camshaft for clearance. What's the best way to go about this? It looks like most of the slinger will have to be removed to clear the crankcase.
 

ELT

Active Member
#4
I see there is a clearance problem with the oil dipper and the camshaft. I'm looking for input on addressing the problems. I've found some mention of removing material from the camshaft for clearance. What's the best way to go about this? It looks like most of the slinger will have to be removed to clear the crankcase.
I should add this is the arc 6282 rod. Arc notes some modifications to the oil slinger are required.
 
Top