Go-Devil (folding) chain size ?

[Cuyuna]

I have been to the net. charts......maybe someone 's replaced one and knows size. Inner plate size 1/8"-----pitch 1/2. Nothing seems to match up....Thanks Guys... :shrug:

 

[Dodgeboydan]

Man the only thing that rings a bell is that, being 1/2" pitch it should be a 40/41/420 chain. Am I right in thinking what your getting the 1/8 measurement from is the width of the chain roller, between the link plates?

 

[Cuyuna]

Thanks DDan ....I bought a #41 and a #420 master link, the 41 is right pitch 1/2, but pins are to long. The 420 wasn't close.

Yes ,looks like 1/8 inner roller between link plate's very narrow i wonder if its some kind of bicycle chain?

Any help out there :shrug:

 

[Dodgeboydan]

Hmm. A bicycle chain might be a possibility

 

[jeep2003]

sounds like bicycle chain. But youll need to use a bmx style single speed chain. anything with a shift derailer will be skinnier

 

[Cuyuna]

Turns out to be a 1/2 by 1/8 bicycle style chain. It' only about three foot chain from jackshaft hopefully my mighty 2.3 hp motor won't tear up newer quality chain. I will look for a good single speed chain, didn't know there was a differance with derailer. Thanks for the help guy's. :devil2: